The aim of this study was to investigate the efficiency of (1) chemical precipitation by calcium oxide, (2) coagulation/flocculation by ferric chloride (FC), and (3) the combination these two methods in reducing the toxicity of wastewater generated by boat pressure washing. All three methods gave satisfactory results in the removal of colour, turbidity, Cr, Fe, Cu, Zn, and Pb. The concentration...

introduction: the objective of this study was, wastewater quality investigation and removal efficiency of contaminants from the wastewater tile factory by using  coagulants includes ferric chloride, ferric sulfate and ferrous, aluminum sulfate and poly aluminum chloride in order to reuse it in the processing line. methods: this is an applied study. with regard to shiftwork schedules of the fact...

The current study analyses the performance of deep sand filtration of greywater from an office building and the performance of a combined physicochemical process comprising of coagulation, sedimentation and filtration. Raw greywater quality exhibited very high variability with average turbidity of 35 NTU, and TSS, COD(t), and BOD of 45, 240, 75 mg/l respectively. The stand-alone filter removed ...

Moringa oleifera is an indigenous plant to Malaysia whose seeds are used for water purification. Many studies on Moringa oleifera have shown that it is highly effective as a natural coagulant for turbidity removal. In this study, two different methods for extraction of Moringa's active ingredient were investigated. Results of sodium chloride (NaCl) and distilled water extraction of Moringa olei...

Flocculation with titanium tetrachloride (TiCl(4)) and titanium sulfate (Ti(SO(4))(2)) was investigated in terms of different coagulant doses, pH, turbidity, dissolved organic carbon (DOC), UV-254, colour, zeta potential, particle size and molecular weight distribution. The two coagulants were compared with the commonly used coagulants such as ferric chloride (FeCl(3)) and aluminium sulfate (Al...

background: car wash waste water contains several contaminants such as organic matter, oil, grease, detergents and phosphates, all of which are harmful for the environment. in this study, the application of electrocoagulation (ec) to treat car wash waste water has been studied, and the operating parameters optimized. the electro-fenton (ef) for further contaminant removal was also investigated....

Introduction: Paper and paperboard industry wastewater has potentially damaging effects on the ecosystem of the receiving environments due to the presence of toxic compounds. As a result, the treatment of such wastewater is necessary prior to discharge into the environment. In this study, the potential of Plantago major L. seed extract as a natural coagulant in treating paper and paperboar...

Introduction: The most important environmental problem of automotive industries is the produced wastewater due to its various processes. The flocculation and coagulation along with chemical sequestration are among important processes for removing contaminants from wastewaters. The aim of this study is to investigate the efficiency of coagulation and flocculation process along with chemical sequ...

background: application of potassium ferrate is a chemical oxidation approach used for water and wastewater treatment. the aim of this study is to apply central composite design (ccd) and response surface methodology (rsm) to optimize potassium ferrate consumption in the treatment of wastewater from carpet industries. methods: samples in this experimental study were collected from wastewater, o...