in this study carburizing and boronizing processes were applied to powder metallurgy steel specimens and the mechanical and tribological properties of the substrate and coatings were evaluated under various process conditions. the specimens, made from industrial test pieces, were carburized in a powder pack for a duration of 2-5 hrs at 850-950 ˚c. similar specimens were pack boronized for 4 hrs...

The authors investigated tribological characteristics, phase composition of worn surfaces and microhardness subsurface regions WC–(Fe–Mn–C) composites with a two-phase (γ + α′) matrix containing 4 wt % Mn (WC–80G4), single-phase γ-iron 20 (WC–80G20) after sliding against disk high-speed steel at contact pressure 5 MPa speeds in the range from 10 to 37 m/s. wear intensity WC–80G4 WC–80G20 increa...

This study describes the influence of the steel characteristics of Ca-treated carburising steel grades during hard part turning of synchronising rings in gearbox production. The main focus was on the chemical composition of the non-metallic inclusions in the evaluated workpieces and their effect on the PCBN tool wear. In addition, a Ca-treated carburising steel grade was compared to a standard ...

Polyethylene wear increasingly has been blamed for osteolysis and granuloma formation after total joint arthroplasty. The authors evaluated the wear difference between bearing surfaces of stainless steel, cobalt chrome, and titanium alloy. They also compared cemented all-polyethylene molded cups with cemented metal-backed molded acetabular cups. These were compared with molded and machined poly...

Wear of Poly (Methyl MethAcrylate), PMMA, against a metallic surface, AISI 316L stainless steel, SS, has been investigated in dry conditions. These materials have been used to simulate the degradation of the contact, femoral stem-bone cement in the field of hip prosthesis. First of all, no significant wear was observed on the 316L SS. PMMA wear has been quantified: the energy wear coefficient, ...

The application of martensitic stainless steel in gas turbine blades, bushings, valves and mine ladder rungs requires wear and corrosion resistant surfaces. The process of boronizing can produce extremely hard and wear resistant surfaces for such components. The study depicts the application of Taguchi based desirability analysis for parameter design in the process of boronizing martensitic sta...

The microstructure and wear resistance of Stellite 6 alloy hardfacing layer at two different temperatures (room temperature and 300°C) were investigated by plasma arc surfacing processes on Q235 Steel. Tribological test was conducted to characterize the wear property. The microstructure of Stellite 6 alloy coating mainly consists of α-Co and (Cr, Fe)7C3 phases. The friction coefficient of Stell...

Original scientific paper The microstructural transformations which took place during the welding of duplex steel as well as their influence on the resistance to particle erosion wear and cavitation erosion wear were investigated. A sample was cut from a 1.4462 rolled steel plate and heat treated in order to obtain a microstructure which would resemble, as closely as possible, the actual welded...

The presence of oxygen in the environment in which a steel sliding system operates will promote a mild form of wear with wear debris consisting mainly of iron oxides. Of the oxidation-dominated mechanisms, mild-oxidational wear (the prefix describes the extent of oxidation and not the wear rate) has been most extensively investigated. In this paper, examples will be used to show that the wear-m...

This work aims at investigating experimentally fretting corrosion, that is, corrosion induced by friction of AISI 316L SS against poly(methyl methacrylate) under small displacements, and subsequently using the data to model wear. The observed wear on the stainless steel has been modeled using the Point Defect Model (PDM). The originality of this approach in applying the PDM to fretting corrosio...