The effects of polytetrafluoroethylene (PTFE), graphite, ultrahigh molecular weight polyethylene (UHMWPE), and their compounds on mechanical and tribological properties of glass-fiber-reinforced polyamide 6 (PA6/GF) were studied. The polymeric materials were blended using twin-screw extruder and subsequently injection molded for test samples. Mechanical properties were investigated in terms of ...

By taking advantage of design and construction of strong graphene-matrix interfaces, we have prepared modified graphene/polyimide (MG/PI) nanocomposites via a two-stage process consisting of (a) surface modification of graphene and (b) in situ polymerization. The 2 wt % MG/PI nanocomposites exhibited a 20-fold increase in wear resistance and a 12% reduction in friction coefficient, constituting...

In the metal cutting process, the friction and wear behavior between the cutting tool and machined surface is the most important factor that affects the surface quality and the service life of the cutter. The irregular pore structure of porous titanium alloy has changed its mechanical properties and the processing technology. The friction and wear mechanism of the cutting tool and the machined ...

Substantially reducing the rate of generation of wear particles at the surfaces of ultra-high-molecular-weight polyethylene (UHMWPE) orthopedic implant bearing components, in vivo, is widely regarded as one of the most formidable challenges in modern arthroplasty. In the light of this, much research attention has been paid to the myriad of endogenous and exogenous factors that have been postula...

Abstract: Date palm is one of the most cultivated palms mostly found in the Middle Eastern regions of the world. The date palm fruits are not only nutritionally rich, but also have a good amount of fatty acids such as oleic acid, palmitic acid, and linoleic acids, which have excellent anti-wear and lubricating properties, making it a potentially good candidate to be used as an environmentally-f...

This paper is concerned with the investigation of the capability of Detonation sprayed Ni-Cr And Al2O3 13TiO2 coatings to improve the tribological and mechanical properties of grey cast iron. The present study describes and compares the mechanical and tribological properties of NiCr and Al2O3 13TiO2 D-Sprayed coatings deposited on two different substrates (GI250 and GIHC) Experiments using a tr...

17-4ph stainless steel is a martensitic precipitation hardening stainless steel that provides an outstandingcombination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. this valuable alloy is widely used in the aerospace, nuclear, chemical, petr...

Tetraalkylammonium salts have larger ions than metal ions, which can greatly change the interlayer space and energy, and then potentially tune the properties of graphite. In this work, various graphite intercalation compounds (GICs) have been synthesized by intercalating tetraoctylammonium bromide (TOAB) ions into graphite through electrochemical interactions under different reduction potential...