The possibility of alloying can not be avoided at the interface between molten brazing filler metal and base metal in brazing, so the wettability of brazing filler metal can not be easily explained theoretically. We used the original apparatus for wettability test and investigated the relation between the wettability of brazing filler metals of Ag-P-Cu and Ag-Cu-Zn-Cd systems on copper and the ...

The surface wettabiJity and fats of yellow bird1wood were examined in an attempt to illustrate how heat-induced d1anges in wood fats might be related to d1anges in surface wettability. A marked reduction of surface wettability accompan;ed heating of yellow birchwood. The degree of water repellency imparted to the waod was highly dependent upon heating temperature and time. Acetone extraction of...

A new wettability evaluating system was developed by combining a contact angle measurement instrument, which optically and insitu measures the contact angle of molten solder, with a conventional wettability tester (meniscograph). Using this new evaluation system, a well-known experiential knowledge that the wettability for Sn-3.5Ag, a typical Pbfree solder, is inferior to that for Sn-37Pb is qu...

Wettability of sedimentary rock surface is an essential parameter that defines oil recovery and production rates a reservoir. The discovery wettability alteration in reservoirs, as well complications occur analysis heterogeneous sample, such shale, for instance, have prompted scientists to look the methods assessment at nanoscale. At same time, bulk techniques, which are commonly applied, USBM ...

We use a pore-scale network model in conjunction with conventional reservoir-scale simulations to investigate wettability variation within an oil/water transition zone. If the initial water saturation within the transition zone is controlled by primary drainage, we predict that initial production behavior is the same regardless of wettability. However, if the initial water saturation has been m...

Soil wettability is especially important for rainfed agriculture in climates with a dry period during the growing season. The effect of aggregate structure and soil organic C content on wettability of soil aggregates was determined for grassland (grass) and tilled fields (tillage). Soil organic C, plastic limit, aggregate total porosity, and wettability at 100 mm (rapid wetting) and 300 mm (slo...

Surfactant flooding is an enhanced oil recovery (EOR) method for recovering residual in the reservoir through mechanism of interfacial tension (IFT) reduction and wettability alteration. Due to toxicity high cost associated with conventional surfactants, recent research has focussed on developing low-cost environmentally benign surfactants. Herein, a green surfactant extracted from Vernonia Amy...

Analysis of fluid flow in naturally fractured reservoirs (NFRs), as a highly heterogeneous and complex system, requires detailed study the fracture-matrix interactions. The main process movement between fracture matrix is spontaneous imbibition (SI), which can occur co/countercurrent states. In addition, most carbonate rocks are non-water-wet, lead to low oil recovery. Wettability greatly affec...