In the present study the treatment efficiency of O3 and UV+O3 processes were compared for the oxidation of simulated dyebath effluent containing a mixture of a reactive dye (C.I. Reactive Blue 19) and various dye auxiliary chemicals. The color, COD and TOC removal rates were assessed for different processes. The effect of initial dye concentration and presence of sodium hydroxide and sodium car...

present study dealt the removal of cr(vi) in a tannery industry wastewater using rice husk silica powder as an adsorbent.the experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different ph against the initial cr(vi) concentration of 292 mg/l. the maximum percentage removal of cr(vi) in the tannery indust...

The chemical composition and aluminum speciation of sludge incineration residue (SIR) were determined. Cementation of aluminum from sulfuric acid solution using SIR was studied. The results showed that acid-soluble inorganic aluminum was the predominant component in the sludge, and the total leached aluminum increased from 62.2% to 92.9% after incineration. Sulfuric acid dosage and reaction tim...

Magnesium chloride, though cost wise roughly same as of ferrous sulphate, is less commonly used coagulant in comparison to the ferrous sulphate for the treatment of wastewater. The present study was conducted to investigate the comparative effectiveness of ferrous sulphate (FeSO4.7H2O) as iron based salt and magnesium chloride (MgCl2) as magnesium based salt in terms of decolorization and chemi...

In recent years, electrokinetic (EK) remediation method has been widely considered to remove metal pollutants from contaminated dredged sediments. Chelating agents are used as electrolyte solutions to increase metal mobility. This study aims to investigate heavy metal (HM) (As, Cd, Cr, Cu, Ni, Pb and Zn) mobility by assessing the effect of different chelating agents (ethylenediaminetetraacetic ...

Fe(3)O(4) coated polypyrrole (PPy) magnetic nanocomposite was prepared via in situ polymerization of pyrrole monomer for the removal of highly toxic Cr(VI). Structure and morphology of the prepared nanocomposite were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction pattern, Field emission scanning electron microscopy (FE-SEM) an...

Cr(VI) is a highly toxic metal ion and considered a priority pollutant released from various chemical industries. Treatment methods to remove Cr(VI) from water and wastewater include chemical precipitation, ion exchange, membrane separation, electro-coagulation and reduction. These methods are not economically viable for large scale treatment of wastewater that is rich in Cr(VI). Adsorption is ...

In this research, the effects of different color intensities, anoxic + anaerobic times and types of substrate on color removal effectiveness were studied using 16-litre bench scale sequencing batch reactor (SBR) anoxic + anaerobic/aerobic models. The systems were fed with a synthetic wastewater containing 500 mg/l of COD, 50 mg/l of N, 15 mg/l of P along with 10, 40 and 80 mg/l of reactive diaz...

Forward osmosis (FO) technology has been applied for removal of chromium (Cr) from water environment. Comparison the efficiency Cr(VI) and Cr(III) was investigated by changing several operational conditions. The pH feed solution plays an important role in rejection Cr. increased with increasing pH, while stable. It also demonstrated that Cr higher when membrane active layer faces compared to dr...

the research aimed to apply the taguchi method for techno-economical evaluation of cr+6 removal using the electro-coagulation process with the aid of two different coagulants (fecl3 and pac). taguchi orthogonal array l27 (313) was applied for analyzing the effect of four variables including initial ph, reaction time, current density and coagulant types in an attempt to improve the chromium remo...