nanocomposite of zro2/zno was prepared under ultrasonic irradiation by sol gel process from directly mixing zirconium and zinc gels. the mixture was placed under ultrasonic irradiation for 2 hours. after the aging time and filtration of the reaction mixture, the filtrated composite gel was calcinated at 500 °c for 3h in furnace. the precursor gels of zirconium and zinc were prepared from dissol...

A ZnO compact layer formed by electrodeposition and ZnO nanorods grown by chemical bath deposition (CBD) allow the processing of low-temperature, solution based and flexible solid state perovskite CH3NH3PbI3 solar cells. Conversion efficiencies of 8.90% were achieved on rigid substrates while the flexible ones yielded 2.62%.

This article reports forward and reverse biased emission in vertical ZnO nanowire/p-GaN heterojunction light emitting diodes (LEDs) grown out of solution on Mg-doped p-GaN films. The electroluminescence spectra under forward and reverse bias are distinctly different. Forward bias showed two peaks centered around 390 nm and 585 nm, while reverse bias showed a single peak at 510 nm. Analysis of t...

This paper reports direct growth of [001] ZnO nanorod arrays on ITO substrate from aqueous solution with electric field assisted nucleation, followed with thermal annealing. X-ray diffraction analyses revealed that nanorods have wurtzite crystal structure. The diameter of ZnO nanorods was 60–300 nm and the length was up to 2.5 μm depending on the growth condition. Photoluminescence spectra show...

We were successful in synthesizing periodic layered zinc acetate nanobelts through a hydrothermal solution process. One-dimensional structured ZnO nanoparticle aggregate was obtained by simple thermal annealing of the above-mentioned layered ZnO acetate nanobelts at 300 C. The morphology, microstructure, and composition of the synthesized ZnO and its precursors were characterized by transmissio...

The structural and optical properties of polyvinyl alcohol (PVA) doped with different concentrations (0, 0.15, 0.5, 1, 2, 2.5, and 3 wt %) of ZnO nanoparticles were studied. ZnO nanoparticles were prepared by the solgel methode, and nanocomposite films were prepared using the solution casting methode. Nanocomposites films were characterized by X-ray diffraction (XRD), Fourier Transformer Infrar...

This paper reports for the first time the use of perovskite bismuth ferrite (BiFeO3 or BFO) on ZnO-based solid state solar cells using only chemical solution methods for materials synthesis. As ZnO has poor chemical stability in acidic and corrosive environments, a buffer method using aminosilane ((3-aminopropyltriethoxysilane or H2N(CH2)3Si(OC2H5)3)) coating was used to provide a protective co...

Solution-processed zinc oxide (ZnO)-based planar heterojunction perovskite photovoltaic device is reported in this study. The photovoltaic device benefits from the ZnO film as a high-conductivity and high-transparent electron transport layer. The optimal electron transport layer thickness and post-baking temperature for ZnO are systematically studied by scanning electron microscopy, photolumine...

ZnO and Mn-ZnO nano powders were prepared by the sol-gel auto combustion method. The products were characterized by X-ray diffraction (XRD), energy dispersive analysis of X-ray (EDX) and scanning electron microscopy (SEM). Structural and morphological properties of nano particles were investigated and the average crystalline size of ZnO and Mn-doped ZnO was obtained 44 and 51 nm, respectively. ...

In this study, a novel method called “atmospheric pressure solution evaporation (APSE)” wasdeveloped for growing of Zinc Oxide (ZnO) nanostructures on Al2O3 surface. Zinc acetate dihydrate,Polyvinyl Pyrrolidone, and deionized water were used as precursor, capping, and solvent, respectively.The growth of ZnO nanostructures from evaporated solution was performed at three temperatures of300, 400, ...