Feasibility of an oxidized Ni/Au p contact on some aspects of device applications for a GaN/InGaN multiple quantum well light-emitting diode ~LED! was investigated. For the oxidation of Ni/Au p contact, furnace annealing of a completely fabricated LED was performed at 600 °C for 5 min in an O2 ambient. For the case of LED with an oxidized Ni/Au system, the I – V measurements showed a reduction ...

A series of Ni/SBA-15/Al(2)O(3)/FeCrAl metal monolithic catalysts with Ni loadings varying between 3 % and 16 % were prepared, and their structure was characterized by various techniques. The catalytic activity of the catalyst for methane reforming with CO(2) leading to synthesis gas was evaluated using a fixed-bed reactor. The results indicate good catalytic activity of the Ni/SBA-15/Al(2)O(3)...

Estuarine and marine sediments are a probable end point for many engineered nanoparticles (ENPs) due to enhanced aggregation and sedimentation in marine waters, as well as uptake and deposition by suspension-feeding organisms on the seafloor. Benthic infaunal organisms living in sediments encounter relatively high concentrations of pollutants and may also suffer toxic effects of ENPs. We tested...

The oxidation behavior of two types of inhomogeneous nickel was investigated in air at 1273 K for a total oxidation time of 100 h. The two types were porous sintered-nickel and microstructurally inhomogeneous cast-nickel. The porous-nickel samples were fabricated by compacting Ni powder followed by sintering in vacuum at 1473 K for 2 h. The oxidation kinetics of the samples was determined gravi...

Thick carbon nanofiber (CNF) films were uniformly grown on metal wires with the assistance of pre-deposited NiO nanowalls. The as-prepared wire-shaped composites that integrate the capacitance of CNFs and Ni particles were directly used as electrodes to construct high capacitive fiber supercapacitors for micro-power supplies.

High-quality ultrathin two-dimensional nanosheets of α-Ni(OH)2 are synthesized at large scale via microwave-assisted liquid-phase growth under low-temperature atmospheric conditions. After heat treatment, non-layered NiO nanosheets are obtained while maintaining their original frame structure. The well-defined and freestanding nanosheets exhibit a micron-sized planar area and ultrathin thicknes...

The YSZ-NiO ceramics for solid oxide fuel cells (SOFCs) anode have been investigated. A series of specimens were singly reduced in a hydrogenous atmosphere (Ar-5 vol% H2 mixture) at 600 °C under the pressure of 0.15 MPa or subjected to 'reduction in the mixture-oxidation in air' (redox) cycling at 600 °C. The YSZ-Ni cermets formed in both treatment conditions were then aged in 'water vapor in A...

Four-level nonvolatile small-molecule 4F(2) memory cells were developed with a sandwiched device structure consisting of an upper Al electrode, upper small-molecule layer (Alq(3), aluminum tris(8-hydroxyquinoline)), Ni nanocrystals surrounded by NiO tunneling barrier, lower small-molecule layer, and bottom Al electrode. In particular, an in situ O(2)-plasma oxidation process following Ni evapor...