نتایج جستجو برای: کامپوزیت cc sic

تعداد نتایج: 49427  

2018
Guo-Bin Sano Hideaki Uchiyama Guo-Bin Zheng Hideaki Sano Yasuo Uchiyama

A carbon nanotube-enhanced SiC (CNT-SiC) coating was deposited on C/C composites to improve the oxidation resistance of C/C. The CNT-SiC coating was prepared by direct growth of CNTs on C/C surface at 700oC followed by deposition of SiC using chemical vapor deposition at 1150oC for 1 hour. SiC was deposited on the CNTs as well as the interface between CNTs and C/C, making CNTs strongly rooted o...

Journal: :Chest 2002
Hector G Ortega David N Weissman Deanna L Carter Daniel Banks

STUDY OBJECTIVES To document the current practice of occupational asthma (OA) diagnosis and use of specific inhalation challenge (SIC). DESIGN, SETTING, AND PARTICIPANTS A survey evaluating the current practice of SIC was mailed to 259 residency training programs in adult pulmonary diseases, allergy and immunology, and occupational medicine accredited in the United States and Canada during th...

Journal: :Journal of innate immunity 2010
Morgan A Pence Suzan H M Rooijakkers Anna L Cogen Jason N Cole Andrew Hollands Richard L Gallo Victor Nizet

Streptococcal inhibitor of complement (SIC) is a highly polymorphic extracellular protein and putative virulence factor secreted by M1 and M57 strains of group A Streptococcus (GAS). The sic gene is highly upregulated in invasive M1T1 GAS isolates following selection of mutations in the covR/S regulatory locus in vivo. Previous work has shown that SIC (allelic form 1.01) binds to and inactivate...

, ,

In this study, the effect of two types of SiC powders consist of SiC-1 (β-SiC) and SiC-2 (β-SiC+α-SiC) and also different values of CaO additive consist of 0, 0.4 and 0.8 weight percent on sintering behavior of sintered SiC with pressureless technique in Al2O3-Y2O3-CaO additive system  was investigated. In all specimens, Al2O3:Y2O3 molar ratio was equal to 3:2 and all amounts of additive were e...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه سمنان 1390

تغییر فرم های پلاستیک شدید از جمله فرآیندهایی می باشند که در چند دهه اخیر مورد توجه محققین واقع شده اند . در تغییر فرم های پلاستیک شدید کرنش اعمالی مقدار بالاتری نسبت به فرآیندهای معمولی تغییر شکل دارد که بسته به نوع تغییر فرم این مقدار متغیر می باشد. فرآیند اتصال نورد تجمعی از جمله فرآیندهای تغییر فرم پلاستیک شدید می باشد که برای حصول به ساختار فوق العاده ریز دانه از آن استفاده می شود و مبنای ...

هدف از این پژوهش بررسی پایداری‌ نانوذرات SiC به‌منظور پوشش‌دهی بر روی کامپوزیت کربن ـ کربن به روش EPD می‌باشد. بدین منظور سوسپانسیون‌هایی در حلال‌های مختلف و در حضور پراکنده‌ساز PEI تهیه شدند. پایداری سوسپانسیون‌ها توسط تصاویر ماکروسکوپی تهیه شده از آن‌ها پس از گذشت 24 ساعت و اندازه‌گیری پتانسیل زتا و توزیع اندازه ذرات ‌مورد بررسی قرار‌گرفت. در ادامه پوشش مورد نظر از سوسپانسیون بهینه بر روی زیر...

2014
Dan Zhu Mingxia Gao Hongge Pan Yi Pan Yongfeng Liu Shouquan Li Hongwei Ge Ningxiang Fang

Dense silicon carbide (SiC) matrix composites with SiC whiskers and particles as reinforcement were prepared by infiltrating molten Si at 1550 °C into porous preforms composed of pyrolysed rice husks (RHs) and extra added SiC powder in different ratios. The Vickers hardness of the composites showed an increase from 18.6 to 21.3 GPa when the amount of SiC added in the preforms was 20% (w/w), and...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی (نوشیروانی) بابل - دانشکده مهندسی مکانیک 1393

منیزیم سبک ترین فلز ساختاری است که چگالی آن در حدود 2/3 چگالی آلومینیم و 1/4 چگالی فولاد است، اما به دلیل خواص مکانیکی و مقاومت به خوردگی پایین، کاربرد آن محدود شده است. از آنجا که تنها تعداد کمی از عناصر قابلیت تشکیل محلول جامد با منیزیم را دارند، در سال های اخیر استفاده از کامپوزیت های زمینه منیزیمی، جهت بهبود خواص مکانیکی منیزیم، افزایش یافته است. در این پژوهش نانوکامپوزیت sic mg-با روش آلیا...

2013
J H Choi L Latu-Romain E Bano Anne Henry W J Lee J. H. Choi E. Bano W. J. Lee

Different polytypes (α-SiC and β-SiC) and crystallographic orientations ((0001) and (11-20) of 6H-SiC) have been used in order to elaborate Silicon Carbide (SiC) nanopillars using inductively coupled plasma etching method. The cross section of the SiC pillars shows a rhombus, pentagon, or hexagonal morphology depending on polytypes and crystallographic orientations. The favored morphologies of ...

2011
B. P. Burton Steve Demers A. van de Walle

The cluster-expansion method was used to perform first principles phase diagram calculations for the wurtzite-structure quasibinary systems (SiC)1 X(AlN)X, (SiC)1 X (GaN)X and (SiC)1 X(InN)X; and to model variations of band gaps as functions of bulk compositions and temperature. In SiC-AlN, plane wave pseudopotential formation-energy calculations predict low-energy metastable states with format...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید