Incorporation of silver nanoparticles into composite resins is recommended for their reported antibacterial properties, but this incorporation can affect the wettability of such materials. Therefore, this study evaluated the effect of nano-silver addition to silorane-based and methacrylate-based composites on their contact angle. Nano-silver particles were added to Z250 (methacrylate-based) and...

Using analytically pure calcium carbonate and silica as raw materials, high purity tricalcium silicate (C3S) is prepared by solid-state reaction. The tricalcium silicate was sintered at a temperature of 1550°C with the heat preservation time of 6 h. The final sample needs three times of calcination circles. Ultrasonic cleaning machine was used to disperse the water and different amount of nano-...

A novel low-cost 2D silicon nano-mold fabrication technique was developed based on Cu inclined-deposition and Ar(+) (argon ion) etching. With this technique, sub-100 nm 2D (two dimensional) nano-channels can be etched economically over the whole area of a 4 inch n-type <100> silicon wafer. The fabricating process consists of only 4 steps, UV (Ultraviolet) lithography, inclined Cu deposition, Ar...

BACKGROUND This paper introduces a new nanoformulation of 5-aminolevulinic acid (nano-ALA) as well as a novel quantitative approach towards evaluating field cancerization for actinic keratosis and/or skin photodamage. In this pilot study, we evaluated field cancerization using nano-ALA and methyl aminolevulinate (MAL), the latter being commercialized as Metvix(®). METHODS AND RESULTS Photodyn...

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO(2), nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservativ...

nanocomposites based on polyamide 6/polypropylene  )pa6/pp 67/33) blend containing 2.5 to 10 phr of nano-caco3  and 5 phr of maleated polypropylene )pp-g-mah) as compatibilizer were prepared by melt compounding followed by injection molding. the mechanical properties, water absorption, as well as shrinkage behavior were characterized and the morphology was studied using scanning electron micros...

in this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(v/v) percent of the reports. the overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

Over the last two decades, nanotechnology has not only grown considerably but also evolved in its use of scientific terminology. This paper examines the growth in nano-prefixed terms in a corpus of nanotechnology scholarly publications over a 21-year time period. The percentage of publications using a nanoprefixed term has increased from \10 % in the early 1990s to nearly 80 % by 2010. A co-wor...