G. Krolczyk, Opole University of Technology, Faculty of Production Engineering and Logistics, Opole, Poland; P. Nieslony, Opole University of Technology, Department of Manufacturing Engineering and Production Automation; S. Legutko, Poznan University of Technology, Institute of Mechanical Technology, Poznan, Poland; I. Samardzic, J.J. Strossmayer University of Osijek, Mechanical Engineering Fac...

The behaviours of as-received and recrystallised (homogenised) MA 956, an Al-containing Cr-rich ferritic stainless steel, aged at 475 "C for up to 2900 hours have been investigated. Atom probe microanalysis of the decomposition products revealed that A1 did not partition significantly to the Fe-rich phase after =600 hours ageing, contrary to thermodynamic predictions. Ageing to 2900 hours, howe...

There are many steels which are stronger than 2000 MPa, with toughness values exceeding 100 MPa m and which have been in commercial service for many decades. Examples include the marageing alloys and carbide–free bainitic steels. By contrast, welding consumables with a proof strength in excess of 1000 MPa are few and far between. This is because whereas wrought steels can be thermomechanically ...

Ceria-based gold catalysts were successfully deposited on ferritic stainless steel (Fecralloy) and aluminium monoliths. The prepared monolithic and reference powder catalysts were characterized by means of SBET, X-ray diffraction, glow discharge optical emission spectroscopy and scanning electron microscopy–energy dispersive X-ray analysis techniques and tested in the CO oxidation reaction. Cha...

The interaction between the surface of stainless steel and Bacillus cereus was studied in terms of the characteristics of interfacial interaction determined from the measurement of the contact angle of the surface of B. cereus and stainless steel in the presence or absence of B. cereus adherence. The microtopographies and the roughness of the surface of stainless steel and stainless steel adher...

Ferrite of austeno-ferritic stainless steels maintained for a long time at temperatures in the range of 270 °C to 400 °C is embrittled like the known 475 °C embrittlement of ferritic stainless steels. Deformation and damage micromechanisms of a material must be known in order to apply the “local approach to fracture” (LAF) methodology. In this work we test a previous model of damage nucleation ...

Citation Suresh Kumar K. Numerical modeling of an autogenous butt joint welding of low carbon ferritic steel sheets using a pulsed Nd: YAG laser beam.

A three-dimensional finite element model was developed to predict the temperature distribution and phase transformation in deposited stainless steel 410 (SS410) during the Laser Engineered Net Shaping (LENS) rapid fabrication process. The development of the model was carried out using the SYSWELD software package. The model calculates the evolution of temperature in the part during the fabricat...

When will a small or low-contrast feature, such as an embedded second-phase particle, be visible in a scanning transmission electron microscopy (STEM) X-ray map? This work illustrates a computationally inexpensive method to simulate X-ray maps and spectrum images (SIs), based upon the equations of X-ray generation and detection. To particularize the general procedure, an example of nanostructur...