The aluminum impregnated catalysts of Al-alumina (Al-Al2O3), Al-montmorillonite (Al-Mmn) and Al-activated charcoal (Al-AC) of various percent loadings were prepared by wet impregnation method and characterized by SEM, XRD and N2 adsorption/desorption (BET). The catalytic properties were investigated in the degradation of waste polystyrene (WPS). The results of catalytic degradation of Al metal,...

Gold nanoparticles on Al2O3-coated gold films are presented as a chemically and thermally robust platform for molecular sensing. Single particle spectroscopy as a function of Al2O3 coating thickness shows reproducible gold nanoparticle scattering spectra in the range from 690 to 610 nm as the Al2O3 thickness increases from 0 to 3.4 nm. Numerical simulation of these structures indicates that sur...

Advanced ceramic materials are gradually becoming very important for their superior properties such as high hardness, wear resistance, chemical resistance, and high strength to weight ratio. But machining of advanced ceramic like Al2O3-ceramics is very difficult by any well known and common machining processes. Normally, cleavages and triangular fractures generate when machining of these materi...

ZnO/Al2O3 multilayers were prepared by alternating atomic layer deposition (ALD) at 150°C using diethylzinc, trimethylaluminum, and water. The growth process, crystallinity, and electrical and optical properties of the multilayers were studied with a variety of the cycle ratios of ZnO and Al2O3 sublayers. Transparent conductive Al-doped ZnO films were prepared with the minimum resistivity of 2....

This work reports on recent advances in the deposition of non-wettable coatings with high water contact angles (WCAs). We propose a simple and easily-controlled method for fabricating different types of nanoestructured films of Al2O3 with hydrophobic properties by Physical Vapour Deposition (PVD). The films have been deposited over three types of hydrophilic substrates with very different value...

HHigh-k LaAlO3 (LAO) thin films with and without Al2O3 buffer layers were deposited on n-type silicon substrates using a pulsed laser deposition method. The dielectric constant of the LAO thin film increased from 5.2 to 23.1 as its thickness increased from 20 to 500 Å. The effective dielectric constants of the LAO (120 Å)/Si and LAO(105 Å)/Al2O3(15 Å)/Si were 12.5 and 23.2, respectively. The fl...

Using a reactive force field ~ReaxFF!, we investigated the structural, energetic, and adhesion properties, of both solid and liquid Al/a-Al2O3 interfaces. The ReaxFF was developed solely with ab initio calculations on various phases of Al and Al2O3 and Al-O-H clusters. Our computed lattice constants, elastic constants, surface energies, and calculated work of separation for the solid-solid inte...

The properties of CaCu3.1Ti4O12.1 [CC3.1TO] ceramics with the addition of Al2O3 nanoparticles, prepared via a solid-state reaction technique, were investigated. The nanoparticle additive was found to inhibit grain growth with the average grain size decreasing from approximately 7.5 μm for CC3.1TO to approximately 2.0 μm for the unmodified samples, while the Knoop hardness value was found to imp...

Applying Bragg gratings in Al2O3 channel waveguides, we demonstrate distributed Bragg reflectors with Qfactors of 1.0210 6 . An integrated Al2O3:Yb 3+ waveguide laser with 67% slope efficiency and 47 mW output power is achieved with such cavities.

V2O5 xerogel films were fabricated by casting V2O5 sols onto fluorine-doped tin oxide glass substrates at room temperature. Five, ten and twenty atomic layers of Al2O3 were grown onto as-fabricated films respectively. The bare film and Al2O3-deposited films all exhibited hydrous V2O5 phase only. Electrochemical impedance spectroscopy study revealed increased surface charge-transfer resistance o...