High-performance and low-temperature-compatible solid phase crystallized polycrystalline silicon thin film transistors using thermal oxide buffered aluminum oxide (Al2O3) as gate dielectric are demonstrated. By growing a thermal oxide buffer layer using two-step annealing method, the interface quality is greatly improved, resulting in excellent device performance.

The interactions between 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM][TFS]) and nano-Al2O3 are studied using high-pressure infrared spectroscopy. The thickness of the [BMIM][TFS] interfacial layer on the aluminum oxide are adjusted by controlling the number of washes with ethanol. In contrast to the results obtained under ambient pressure, local structures of both the cations a...

Corundum, a-Al2O3, is the thermodynamically stable phase of coarsely crystalline aluminum oxide, but syntheses of nanocrystalline Al2O3 usually result in g-Al2O3. Adsorption microcalorimetry, thermogravimetric analyses, and Brunauer-Emmett-Teller adsorption experiments, coupled with recently reported high-temperature solution calorimetry data, prove that g-Al2O3 has a lower surface energy than ...

The favourable mechanical properties and high biocompatibility of the newly developed mixed ceramics composed of zirconium oxide and aluminium oxide have continuously extended the scope of their application. Rotating instruments on a zirconium oxide basis are regarded as superior to metal burs in dentoalveolar surgery in terms of favourable temperature effects on the surrounding bone tissue and...

In this work, a 3-5 μm mid-infrared broadband perfect absorber is proposed. The proposed only composed of an aluminium oxide (Al2O3) dielectric layer on the top, silicon (Si) with embedded titanium (Ti) ring in middle and high loss metal substrate. It exhibits extremely absorption performance entire range band, highest average rates 99.91% 98.57%, respectively. excellent at attributed to intrin...

The structural integrity of oxide/metal interfaces is important in many applications. While most attention has focused on the debonding of oxide/metal interfaces by conducting strength and fracture toughness tests, very few investigations have looked at time dependant failure of interfaces under cyclic or static loading. Tests have been conducted on sandwich specimens consisting of 5 100 micron...

We have developed a two-step growth scheme for single-crystal Al2O3 tunnel barriers. The barriers are epitaxially grown on single-crystal rhenium (Re) base electrodes that are grown epitaxially on a sapphire substrate, while polycrystalline Al is used as the top electrode. We show that by first growing an amorphous aluminum (Al) oxide layer at room temperature and crystallizing it at a high tem...

The literature of olefin metathesis by heterogeneous supported catalysts, both industrial-type supported metal oxides (ReOx/Al2O3, ReOx/(SiO2−Al2O3), MoOx/SiO2, MoOx/Al2O3, MoOx/(SiO2−Al2O3), WOx/SiO2, and WOx/ (SiO2−Al2O3)) and supported organometallic complexes, is comprehensively reviewed. The focus of this Review is supported metal oxide catalysts, but the well-defined supported organometal...

An egg-shell Pd/Al2O3 catalyst showed higher activity than a regular Pd/Al2O3 catalyst in the partial oxidation of methane to syngas, but a common problem of this reaction is the catalyst deactivation on stream. We attempted to modify the egg-shell catalyst via impregnation with some metal oxide additives. Although the addition of MgO did not show any beneficial effect, the addition of CaO and/...

laminar mixed convection of aluminium oxide (al2o3)–water nanofluid flow in an inclined annulus using a single-phase approach was numerically studied. constant heat flux boundary conditions were applied on the inner and outer walls. all the thermophysical properties of nanofluid, such as, viscosity, heat capacity, thermal conductivity, and thermal expansion coefficient, except density in the bo...