in this study, behavior of pin-loaded glass fiber reinforced with polyethylene laminated composites with different stacking sequence and different dimensions has been observed experimentally and stress analysis was performed using ansys software. the aim is to investigate stresses, failure strength and failure mode of composite laminates containing a pin loaded hole when the material exhibits l...

In present work, a compressor configuration is taken from literature which will be studied for aspect ratio (ratio between length of blade to chord length) influence over performance. Performance in the sense is pressure ratio of compressor. The aspect ratio of the blade is an important parameter and has a strong influence on the performance of axial flow compressor. There are so many literatur...

In conventional WLCSP process, after defining the under bump metal (UBM) layer, a solder ball is dropped in the UBM opening. A subsequent thermal reflow cycle melts the solder ball and cools it in a well defined shape on top of the UBM layer. One draw back of this technology is the fracture or cracking of passivation film that may occur during the solder ball reflow process. The cracks in the p...

OBJECTIVE To assess the distribution of stress produced on TMJ disc by chincup therapy, by means of the finite element method. METHODS a simplified three-dimensional TMJ disc model was developed by using Rhinoceros 3D software, and exported to ANSYS software. A 4.9N load was applied on the inferior surface of the model at inclinations of 30, 40, and 50 degrees to the mandibular plane (GoMe). ...

The present research is an experimental and numerical investigation on parametric study of vibration and buckling characteristics of industry driven woven fiber Glass-Carbon/epoxy hybrid composite panels. The effects of lamination sequence on the natural frequencies of vibration and buckling strength of the hybrid panels were studied in this investigation. The panels are cast using hand lay-up ...

OBJECTIVE A three-dimensional (3D) finite element analysis (FEA) on the stress distribution of endodontically treated teeth with titanium alloy post and carbon fiber post with different alveolar bone height. MATERIALS AND METHODS The 3D model was fabricated using software to represent an endodontically treated mandibular second premolar with post and restored with a full ceramic crown restora...

Increasing competition and innovation in automobile sector tends to modify the existing products by new and advanced material products. A suspension system of vehicle is also an area where these innovations are carried out regularly.Leaf springs are one of the oldest suspension components that are being still used widely inautomobiles. Weight reduction is also given due importance by automobile...

In general three wheelers are one of the most popular city transport vehicles in the world and particularly in developing countries especially for short hauls. In the present work finite element model of three wheeled motor vehicle chassis has been developed using ANSYS software by taking into account the chassis longitudinal/cross members, the suspensions, the axles and the tires. Modal analys...

This paper focuses on the dynamic behavior of reinforced concrete (RC) slabs. Therefore, the theoretical modal analysis was performed using two different types of boundary conditions. Modal analysis method is the most important dynamic analyses. The analysis would be modal case when there is no external force on the structure. By using this method in this paper, the effects of freely and simply...