In this investigation internal friction of cold worked 304L austenitic stainless steel was measured and the new peaks (PlIP2,P3) were found. The height of those peaks increased with cold work degree. The temperature of the main peak P3 was 33513340K at the frequency of -1,000Hz. The activation energies and frequency factors were obtained from peak shift. The values were 0.4evl 0.4evl 0.6ev and ...

In this study, three different vegetable-based cutting fluids developed from raw and refined sunflower oil and two commercial types (vegetable and mineral based cutting oils), were carried out to determine for thrust force and surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool. The uses of vegetable cutting oils was investigated in reducing thrust force and ...

Using uniaxial tensile and hardness testing, we evaluated the variability and anisotropy of the mechanical properties of an austenitic stainless steel, UNS S17400, manufactured by an additive process, selective laser melting. Like wrought materials, the mechanical properties depend on the orientation introduced by the processing. The recommended stress-relief heat treatment increases the tensil...

In recent years, TRIP/TWIP steels have been the focus of great attention thanks due to their excellent tensile strength-ductility combination. The compression tests were performed at different temperatures from 25 to1000°C to study the mechanical behavior of advanced austenitic steel with 21% manganese plus bearing Ti. The results indicated that the plastic deformation is controlled by deformat...

the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...

Calculations were performed to quantify the damage parameters in the leading candidate structural and plasma facing materials when used in magnetic and inertial confinement fusion systems and when irradiated in fission reactors. The structural materials considered are ferritic steel, austenitic steel, vanadium alloy and SiC/SiC composite. Plasma facing materials included beryllium, tungsten, an...

Steels are heavily used in infrastructure and the transportation industry, and enhancing their fatigue resistance is a major challenge in materials engineering. In this study, by introducing a gradient microstructure into 304 austenitic steel, which is one of the most widely used types of stainless steel, we show that a strength gradient substantially enhances the fatigue life of the material. ...

S. Krum, F. Pešlová, Czech Technical University in Prague, Faculty of Mechanical Engineering Prague, Czech Republic, J. Kliber VŠB TU Ostrava, Czech Republic Corrosion resistant steels are used for the prod uction of parts exposed to corrosive environment and also to thermo-mechanical loads. Steel molds in the glass manufacture industry with their functional surfaces simultaneously exposed to t...

in this study, the application of gray relational analysis (gra) and taguchi method in multi-criteria process parameters selection of turning operation has been investigated. the process responses under study are material removal rate (mrr) and surface roughness (sr); in turn, the input parameters include cutting speed, feed rate, depth of cut and nose radius of the cutting tool. the proposed a...

Themechanical performanceofTRIP-120, a novel transformation induced plasticity steel alloy, is evaluated for different loading cases and strain rates. The performance is compared with HSLA-100, a lowalloy steel developed by the United States Navy and currently used in naval hulls. The response of these materials under uniaxial tension and shear was investigated to the point of fracture at isoth...