Covalent grafting of MCM-41 with 3-chloropropyl trimethoxysilane and subsequent reaction respectively with acacdien and complexation with MoO2(acac)2 afforded MoO2acacdien@MCM-41. X-ray diffraction and nitrogen sorption analyses revealed the preservation of the textural properties of the support as well as accessibility of the channel system despite sequential reduction in surface area, pore vo...

The mesoporous molecular sieve MCM-41 was covalently grafted with 3-chloropropyl trimethoxylsilane and then was reacted with [Cr(salpr)(H2O)]Cl, (salpr = N,N'-bis(3-salicylidenaminopropyl)amine) to afford MCM-41 containing Cr(salpr) moiety, Cr(salpr)MCM-41. Powder X-ray diffraction and nitrogen adsorption-desorption analyses revealed that not only the textural characteristics of the support wer...

in this paper, the development of a new potassium carbonateon alumina support sorbent prepared byimpregnating k2co3 with an industrial grade of al2o3 support was investigated. the co2 capturecapacity was measured using real flue gas with 8% co2 and 12% h2o in a fixed-bed reactor at atemperature of 65 °c using breakthrough curves. the developed sorbent showed an adsorptioncapacity of 66.2 mgco2/...

For a series of metal-organic frameworks with rht topology, we study computationally the effect of the linker length on the surface area, pore size, and pore volume, relating them with the hydrogen adsorption properties. The results provide new insights about the excess capacities and the pressures where the uptake maxima in the excess isotherms occur. We found that, of the materials studied, ...

Mesoporous SiO2 nanopowder was synthesized under an acidic condition by a sol-gel method using various amounts of cetyltrimethyl ammonium bromide (CTAB) as structure directing agent. The samples were investigated with XRD, SEM, FTIR, TEM and N2 absorption-desorption analysis. Also, the incremental effect of surfactant were examined. The results obtained from the analysis suggested that an incre...

importance of covalent bonded two-dimensional monolayer nanostructures and also hydrocarbons is undeniably responsible for creation of new fascinating materials like polyphenylene polymer, a hydrocarbon super honeycomb network, so-called porous graphene. the mechanical properties of porous graphene such as its young’s modulus, poisson’s ratio and the bulk modulus as the determinative properties...

as partial offset volumes to exploit the AVO information in the data. However, there has been significant asymmetry in the way these volumes could be calibrated and inverted. The amplitudes of near-offset, or intercept, stacks relate to changes in acoustic impedance and can be tied to well logs using synthetics based on acoustic impedance (AI) or inverted, to some extent, back to AI using posts...

A novel inter-disciplinary methodology for the generation of rock property and AVO feasibility maps or cubes to be used in subsurface characterization prospect de-risking is presented. We demonstrate workflow 1D, 2D 3D cases on data from North Sea Barents Sea, offshore Norway. The enables rapid extrapolation expected physics properties away well control along selected horizons, constrained by s...

Using hydrothermal synthesis process a series of Mobil Five (MFI) zeolites were synthesized with silica to alumina ratio (SAR) of 50, 100 and 200. The synthesized MFI zeolites were used to exchange with 0.5%, 1.0% and 2.0% Ca(NO3)2 solutions for modification of MFI zeolites to Ca-MFI zeolite. The formation of MFI zeolite phases was identified by XRD and FT-IR analysis. TGA...

mil-53-cu has been synthesized hydrothermally and has been used for the first time for gas separation. mil-53-cu shows adsorption capacities of 8.1, 0.7 and 0.5 m.mol/g, respectively, for ch4, co2 and h2 at 30 bar and 298 k. the high ch4 adsorption capacity of mil-53-cu maybe attributed to the high pore volume and large number of open metal sites. the high selectivity for ch4 over co2 (11.5) an...