Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...

Related Articles Distinguishing defect induced intermediate frequency modes from combination modes in the Raman spectrum of single walled carbon nanotubes J. Appl. Phys. 111, 064304 (2012) Effect of bending buckling of carbon nanotubes on thermal conductivity of carbon nanotube materials J. Appl. Phys. 111, 053501 (2012) Nanotorsional actuator using transition between flattened and tubular stat...

In recent years, several researchers have shown the good performance of alkali activated slag cement and concretes. Besides their good mechanical properties and durability, this type of cement is a good alternative to Portland cements if sustainability is considered. Moreover, multifunctional cement composites have been developed in the last decades for their functional applications (self-sensi...

The field of nanotechnology is rapidly maturing into a fertile and interdisciplinary research area from which new sensor and actuator technologies can be conceived. The tools and processes derived from the nanotechnology field have offered engineers the opportunity to design materials in which sensing transduction mechanisms can be intentionally encoded. For example, singleand multi-walled carb...

in this study, the disadvantages of wood, which is widely employed in producing music instruments, are discussed. for example, high moisture sensitivity, low impact resistance, and time-consuming procedure as well as various properties of different species or in several parts of one specimen which are the main problems of wooden music instruments are extensively discussed in this paper. many ma...

Load transfer and mechanical strength of reinforced polymers are fundamental to developing advanced composites. This paper demonstrates enhanced load transfer and mechanical strength due to synergistic effects in binary mixtures of nano-carbon/polymer composites. Different compositional mixtures (always 1 wt% total) of multi-wall carbon nanotubes (MWNTs) and single-layer graphene (SLG) were mix...

Ruthenium oxide±carbon composites with different loadings of RuO2 on carbon have been synthesized by an electroless deposition process. Increase in RuO2 loading results in increasing the speci®c capacitance of the composite electrode. The effect of temperature treatment on the performance of these materials has been studied in detail. Maximum capacitance was observed after heat treatment at 100...

An estimation procedure for biobased carbon content of polyethylene composite was studied using carbon-14 ((14)C) concentration ratios as measured by accelerated mass spectrometry (AMS). Prior to the measurement, additives and fillers in composites should be removed because they often contain a large amount of biobased carbon and may shift the estimation. Samples of resin with purity suitable f...

The high demand for carbon composite in many industries results in an increase in the embodied energy footprint of carbon composites. Recycling technologies for carbon composites are being developed to reduce the embodied energy footprint of the material. The purpose of this research is to analyze and estimate the specific energy consumption from mechanical recycling method, specifically a ball...