Noble metal nanoslit structure has attracted an increasing interest in nanoscale photonic devices, and bio applications. However, methods typically used for fabricating nano-sized slit, such as, e-beam direct etching, template-assisted photolithography, and nano-imprint lithography, have low yield and are limited to sub-nano sized slit. In this work, we observed that slit width of Au metal is g...

High-quality performance of catalysts is increasingly required to meet industry exigencies. However, chemical synthesis often insufficient maximize the potential properties catalysts. On other hand, electrochemical has arisen as a promising alternative overcome these limitations and provide precise control in preparation In this sense, work involved well-controlled catalyst based on platinum na...

We report a simple stepped growth process for the synthesis of carbon nanotubes (CNTs) having excellent field emission properties. CNT growth was interrupted in the process. During the interruption, the catalyst was re-activated in-situ. This resulted in enhanced growth of the CNTs after the interruption and a film of CNTs re-grew on top of an existing CNT film at much higher rates. The enhance...

In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...

Thin films of LaS were prepared by using spray pyrolysis technique at 270 0 C and thickness were varied by changing the concentration of reactant solution. The films were optically characterized and their variations with film thickness were studies. It was found that thickness can be tuned by varying concentration of reactant solution. The band gap was found to vary between 2.35eV to 2.50eV. Th...

Carbon nanotube (CNT) films are gaining traction in applications such as transparent conductive films, electro-magnetic shields and thin film heaters. However, to date, few cost-effective large-area CNT coating methods have been reported. Here, we present a roll-to-roll (R2R) slot-die process for In this process, suspension is continuously coated on PET substrate subsequently dried packaged. Th...

copper sulphide (cu 2 s) thin films at different thicknesses and annealing temperatures were deposited onto glass substrate by vacuum evaporation method. xrd study reveals the phase transformation of cu     2 s film at higher thickness. optical and resistivity study show the phase transformation of the film from cu     2 s to cus when they are annealed at higher temperature. sem st...

This issue of the IBM journal describes recent advances in the field of nanoscience, with an emphasis on cathode lens-based microscopy methods, including LEEM (low-energy electron microscopy), PEEM (photoemission electron microscopy), and other related analytical approaches. Papers highlight scientific advances and instrumental developments on topics that include thin films, organic films, surf...