After coating, the resist film contains a remaining solvent concentration depending on the resist, the solvent, the resist film thickness and the resist coating technique. The softbake reduces the remaining solvent content in order to: avoid mask contamination and/or sticking to the mask, prevent popping or foaming of the resist by N2 created during exposure, improve resist adhesion to the subs...

The nanosphere lithography (NSL) method can be developed to deposit the Au-Ag triangle hexagonal nanoparticle arrays for the generation of localized surface plasmon resonance. Previously, we have found that the parameters used to form the NSL masks and the physical methods required to deposit the Au-Ag thin films had large effects on the geometry properties of the nanoparticle arrays. Consideri...

by Giuliano Maurizio Laudone Environmentally friendly technology: The behaviour of natural and synthetic binder systems within paper coatings. Coating shrinkage upon drying is a phenomenon well known to the paper coating industJy, where it often causes changes in the final structure of the coating layer leading to poor results in terms of gloss, light scattering, surface strength, coverage, uni...

The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...

In this study, small fraction of NiTi (5 wt%) was added to Yttria stabilized zirconia (YSZ) top coat to improve it sliding wear resistance. The measurement of width of wear tracks after wear tests under a 15 N load for 100 m sliding distances showed that the width of wear track in NiTi-YSZ coating is shorter than that in YSZ coating which depicts the higher wear resistance of NiTi-YSZ coa...

The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...

This paper discusses two common problems, “weld tenting” and low coating thickness over the external weld, and their causes in traditional three layer polyolefin pipeline coatings. To tackle these problems, a new approach to applying multilayer polyolefin coating to pipes is introduced. The new system consists of side-extruding high density polyethylene over a graded structure polyethylene (GSP...

To take advantage of the synergistic effects of Pt and Zr, a kind of Zr-doped, Pt-modified aluminide coating has been prepared by a hybrid process, first electroplating a Pt layer and then co-depositing Zr and Al elements by an above-the-pack process. The microstructure and isothermal oxidation behavior of the coating has been studied, using a Pt-modified aluminide coating as a reference. Resul...

Encapsulation, invented in 1953 by B.K. Green & L. Schleicher employed in the laboratories of the National Cash Register Company, Dayton, USA, is defned as a technology of packaging solids, liquids, or gaseous materials in miniature, sealed capsules that can release their contents at controlled rates under specifc conditions. Encapsulation involves the incorporation of ...