In this study, a robust controller for voltage regulation of the POESLL converter worked in continuous conduction mode is presented. POESLL converter is a DC/DC converter with a high voltage gain. DC/DC converters are used in telecommunication systems, power sources and industrial applications. Owing to the switching operation, the structure of the POESLL converter is highly non-linear. In addi...

This paper investigates the dynamic behavior of Gas Metal Arc Welding (GMAW) process for two types of power supplies –inverter and rectifier- for short circuit transfer mode. The large ripples on the rectifier power source are able to perturb the metal transfer mode. In this experimental work some operating points in the short circuit mode have been selected using an automatic pipeline welding ...

The signal processing circuit of shunt type current sensor is directly coupled with the high voltage electric circuit so that the common-mode interference signal conditioning becomes a problem. This paper proposes a high-voltage isolation current sensor employs modulation and demodulation which is based on shunt output signal. There is an electrical isolation is set between the high voltage and...

A multibit analog-to-digital converter can achieve high resolution with a lower order modulator and lower oversampling ratio than a single-bit design, but it requires a multibit internal flash analog-to-digital converter rather than a simple comparator. In an implementation with a fully differential analog front end, the flash analog-to-digital converter must quantize a differential voltage rel...

The three-level neutral-point clamped voltage source inverter (3L-NPC-VSI) is widely used in the maglev traction systems due to its high output voltage, large capacity and low current harmonics. In order improve utilization of DC-bus an overmodulation strategy necessary. This paper proposes improved based on minimum amplitude error method for a 3L-NPC-VSI. Compared with conventional method, hig...

This paper presents a rail-to-rail constant-gm operational amplifier input stage. The proposed circuit changes the tail current of the input differential pairs dynamically for a constant-gm by using dummy input differential pairs. The problem which causes total gm variation is input pairs and dummy input pairs can not take effect at the same time with the common-mode input voltage changes, beca...