To develop and validate a mathematical model of the relationship between endurance time (T) and power production, 15 male subjects were first tested for maximal power on an instrumented cycle ergometer at 60 rpm. On subsequent days, they were tested for T at various percentages of maximal power. Curves of T as a function of percent maximal power were curvilinear, and could be made to overlap am...

Artificial cemented sand test samples were prepared by using ordinary Portland cement (OPC) as the cementing agent. Through uniaxial compression tests and consolidated drained triaxial compression tests, the stress-strain curves of the artificial cemented sand with different cementing agent contents (0.01, 0.03, 0.05 and 0.08) under various confining pressures (0.00 MPa, 0.25 MPa, 0.50 MPa and ...

Because maximum expiratory flow-volume rates in normal subjects are dependent on gas density, the resistance between alveoli and the point at which dynamic compression begins (R(us)) is mostly due to convective acceleration and turbulence. We measured maximum expiratory flow-volume (MEFV) curves in asthmatics and chronic bronchitics breathing air and He-O(2). In the latter and in some asthmatic...

Due to the fact that the buckling-restrained brace core yields subject to both tension and compression, it can adsorb energy and exhibit high ductility rendering it proper for tolerating earthquake loads. One of the important objectives of seismic standards is safeguarding the appropriate ductility for the structures because the structures, in case of being ductile, can dissipate a considerable...

This paper presents an algorithm dealing with the data reduction and the approximation of 3D polygonal curves. Our method is able to approximate efficiently a set of straight 3D segments or points with a piecewise smooth subdivision curve, in a near optimal way in terms of control point number. Our algorithm is a generalization for subdivision rules, including sharp vertex processing, of the Ac...

The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...

Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...

Deep and high-stress mining results in stress transfers onto the previously placed backfill, mines have recorded several MPa induced backfill stresses. Understanding backfill-rock mass interaction is therefore critical. Previous work considered tabular ore bodies undergoing primarily one-dimensional compression showed how reaction curves could be estimated from oedometer laboratory test results...

dynamic recrystallization, drx, behaviour of a precipitation hardened, ph, stainless steel was studied in connection with microstructural developments in a compression test. the experimental results showed that the dominant mechanism of softening is drx, but at high strain rates and low temperatures, ie, high zener-holman parameter, z, work hardening and dynamic recovery, drv, produced a pancke...

This research was performed to determine the efficiency effect of sedimentary environment of Kerman City area on soil structure bycomparing natural and reconstituted consolidation curves. In this regard, four different criteria such as sensitivity strength, stresssensitivity, Schmertman criteria and the result of the uniaxial compression test were used. The base of these criteria is to compare ...