Vibration energies generated by laser irradiation to a plate with a crack were calculated by the semi-analytical finite element method to elucidate the principle of defect imaging using a scanning laser source. For normal incidence in the ablation regime, the incident energy increases when the incident source is located in the vicinity of the crack, owing to the effect of the non-propagating A1...

In this work, repaired crack in 6061T6 aluminum plate with composite patches presented, firstly we determine the displacement, strain and stress, also the first six mode shape of the plate, secondly we took the same model adding central crack initiation, which is located in the center of the plate, its seize vary from 20 mm to 60 mm and we compare the first results with second. Thirdly we repai...

The vibration behavior of an atomic force microscope [AFM] cantilever with a crack during the nanomachining process is studied. The cantilever is divided into two segments by the crack, and a rotational spring is used to simulate the crack. The two individual governing equations of transverse vibration for the cracked cantilever can be expressed. However, the corresponding boundary conditions a...

Abstract. Due to their microstructure, quasi brittle materials present rough cracks. Under sliding of the crack lips, this roughness involves in one hand induced opening and in the other hand some apparent plasticity which is due to the interlocking of the crack lips combined with Coulomb’s friction. The proposed model is written under the irreversible thermodynamics framework. Micromechanics u...

The compliance technique has been used to monitor crack length during fracture and fatigue testing of materials. Difficulties arise when this technique is applied to anisotropic biological materials such as bone. In this tutorial, two different methods of analyzing compliance calibration data are described: the standard ASTM method and a new approach developed by the authors specifically for an...