Abstract: Chalcopyrite and bornite are two important copper minerals, and they often coexist. In this study, the co-bioleaching of chalcopyrite and silver-bearing bornite by mixed moderately thermophilic culture at 50 ◦C was investigated. The bioleaching results show that the extraction percentage of Cu for co-bioleaching of chalcopyrite (Ccp) and silver-bearing bornite (Bn) (Ccp/Bn = 3:1) was ...

An effect of tempforming on the microstructure, carbide precipitation, and strengthening mechanisms high-strength low-alloyed steel has been analyzed. The quenched was subjected to 1 h tempering at a temperature 873 K, 923 or 973 K followed by plate rolling same temperature. Tempforming resulted in formation an ultrafine grained lamellar-type microstructure with finely dispersed carbides (Nb,V)...

Single crystals of RMg 2 Cu 9 (R = Y, Ce-Nd, Gd-Dy, Yb) were grown using a high-temperature solution growth technique and were characterized by measurements of room-temperature x-ray diffraction, temperature-dependent specific heat, and temperature-and field-dependent resistivity and anisotropic magnetization. YMg 2 Cu 9 is a non-local-moment-bearing metal with an electronic specific heat coeff...

Addition of titanium (Ti) to ASTM A710 Grade B Cu-precipitation-strengthened steel significantly increases the impact absorbed fracture energy and reduces the ductile-to-brittle transition temperature. The effect of Ti correlates with the reduction of the amount of pearlite in the ferritic microstructure. A thorough study of the mechanical properties of Ti-modified A 710-B steel is presented.

The present study aimed to evaluate the bioactivity of titanium surfaces sandblasted with large-grit corundum and acid etched (SLA) plus further alkali or hydrogen peroxide and heat treatment for dental implant application. Pure titanium disks were mechanically polished as control surface (Ti-control) and then sandblasted with large-grit corundum and acid etched (SLA). Further chemical modifica...

Several deficient steel structural members require to be strengthened all over the world. In this article, horizontal defects were generated at three locations (top, middle, and bottom) on the middle element and the middle of the side element. Consequently, the effects of the location of such defects on axial behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened steel Square Hollow Se...