Introduction: Laser tissue soldering using albumin and indocyanine green dye (ICG) is an effective technique utilized in various surgical procedures. The purpose of this study was to perform laser soldering of rat skin under a feedback control system and compare the results with those obtained using standard sutures. Material and Methods: Skin incisions were made over eight rats’ dorsa, which w...

We report long-term laser frequency stabilization using only the target laser and a pair of 5 m fiber interferometers, one as a frequency reference and the second as a sensitive thermometer to stabilize the frequency reference. When used to stabilize a distributed feedback laser at 795 nm, the frequency Allan deviation at 1000 s drops from 5.6 × 10(-8) to 6.9 × 10(-10). The performance equals t...

This Letter reports on an optical pumping scheme, termed resonant pumping, for an erbium-doped distributed feedback (DFB) waveguide laser. The scheme uses two mirrors on either side of the DFB laser, forming a pump cavity that recirculates the unabsorbed pump light. Symmetric distributed Bragg reflectors are used as the mirrors and are designed by matching the external and internal quality fact...

We demonstrated a high-power ultralong-wavelength Tm-doped silica fiber laser operating at 2153 nm with the output power exceeding 18 W and the slope efficiency of 25.5%. A random distributed feedback fiber laser with the center wavelength of 1173 nm was employed as pump source of Tm-doped fiber laser for the first time. No amplified spontaneous emissions or parasitic oscillations were observed...

Narrow linewidth THz generation using a cascaded Brillouin fibre laser structure and a unitraveling carrier photodiode is proposed. Using two distributed feedback lasers separated by > 1 THz with 1 MHz initial linewidth, the linewidth of the realized THz source is found to be < 100 Hz at 1014.7 GHz without use of any active stabilization of the laser cavity or any microwave reference.

Noise reduction in a multiwavelength distributed Bragg reflector fiber laser was demonstrated. A 20 dB reduction of in-phase intensity noise was achieved by using negative feedback to modulate the drive current of the laser pump diode. Strategies for reducing antiphase noise components are discussed.

We derive a coupled-wave theory for backward phase-matched optical parametric amplifiers and oscillators in a dielectric modulated nonlinear optical material. Unlike a forward phase-matched distributed-feedback optical parametric oscillator, a backward oscillator of this type can have high-threshold gap modes at Bragg resonance and low-threshold detuned modes. In addition to the structure feedb...

In this Letter, we report the tuning of the emission wavelength of a single mode distributed feedback quantum cascade laser by modifying the mode effective refractive index using fluids. A fabrication procedure to encapsulate the devices in polymers for microfluidic delivery is also presented. The integration of microfluidics with semiconductor laser (optofluidics) is promising for new compact ...