The drilling and riveting processes are widely used in the assembly of carrier rocket, which makes the efficiency and quality of drilling become the important factor affecting the assembly process. According to the problem existing in the drilling of thick stacked plate (thickness larger than 10mm) of carrier rocket, such as drill break, large noise and burr etc., experimental study of the infl...

Cooling during drilling Kirschner wires is not always effective in preventing thermal related damage. In this study, we used a human in vitro model and compared temperature elevation, insertion time, and extraction force between three Kirschner wire insertion methods-drilling with and without irrigation and pneumatic hammering. Forty five Kirschner wires were inserted into 15 fresh human cadave...

The bone drilling temperature fields under different cutting parameters and cooling modes were experimental researched by using common twist drill, diamond punching pin, diamond bullet-like grinding head and diamond spherical grinding head. Three cooling modes were applied, namely, natural air cooling, normal saline pouring cooling and normal saline spray cooling. K-thermocouple was used to mea...

Drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. There are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. The present work aims are study on the modified drilling mud properties by using the ...

Drilling into a rock massif is energetically extremely consumptive process. Hence the optimization of drilling regime with objective of energy consumption minimization, is very important. Proposed article discusses partial problem of this problem. During the drilling process it is useful to know the drilled rock type, whereas to particular drilled rock needs convenient drilling regime, which is...

vibratory drilling (vd)process is a new modern technology where longitudinal wave with high frequency (more than 16 khz) and low amplitude (usually between 2 up to 30 µm) is superimposed on the movement of cutting tool, resulting in connection and disconnection of cutting tool engagement with workpiece. in this study, in order to perform vibratory drilling process, two vibration tools are desig...

OBJECTIVES The purpose was to assess thermal changes and drill wear in bovine bone tissue with the use of twisted stainless steel and zirconia-based drills, during implant site preparation. METHODS A total of 100 implant site preparations were performed on bovine ribs using a surgical unit linked to a testing device, in order to standardize/simulate implant drilling procedures. Bone temperatu...

Electric Discharge Drill Machine (EDDM) is a spark erosion process to produce micro holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the Electric discharge drilling machine it is very necessary to study the process parameters of machine tool. In this research paper a brass rod 2 mm diameter w...

Concrete strength evaluated from compression tests on cores is affected by several factors causing differences from the in-situ strength at the location from which the core specimen was extracted. Among the factors, there is the damage possibly occurring during the drilling phase that generally leads to underestimate the actual in-situ strength. In order to quantify this effect, in this study t...

Antegrade transmalleolar drilling method is one of the options for the treatment of osteochondral lesion of talus (OLT). We present five patients who underwent tibial drilling for treatment of OLT and later developed distal tibial cystic formation induced by cartilage opening or heat necrosis during drilling. Antegrade transmalleolar drilling can be a possible option for the treatment of OLT if...