Researchers have formulated equations of ductile fracture to simulate and predict defects in cold-forged parts, e.g., the Cockcroft–Latham criterion. However, these are not applicable certain cases forged products. This study formulates a new equation for predicting fractures with better prediction accuracy than convention by which cost trial-and-error design can be reduced. The is expressed as...

A nonlocal constitutive formulation for a porous ductile material is investigated, in which delocalizadon relates to the damage mechanism. An elastic-viscoplastic material model is used, with delocalization incorporated in terms of an integral condition on the rate of increase of the void volume fraction. Two model problems are analysed to study the effect of including this material length, one...

While a freestanding high-strength sheet metal subject to tension will rupture at a small strain, it is anticipated that lamination with a ductile sheet metal will retard this instability to an extent that depends on the relative thickness, the relative stiffness, and the hardening exponent of the ductile sheet. This paper presents an analytical study for the deformability of such laminate with...

The effect of chain packing on tensile properties was studied employing amorphous poly(lactic acid) PLA. It was found that the samples cooled in the temperature range from 60 to 80 °C, that is, slightly higher than the glass transition temperature Tg, showed ductile behavior with a low brittle-ductile transition temperature. Furthermore, the samples obtained by prolonged cooling at 56 °C also s...

A meso-mechanical damage model is developed to predict the tensile damage behaviors of bulk metallic glass composites (BMGCs) toughened by ductile particles. In this model, the deformation behaviors of the BMG matrix and particles are described by the free volume model and Ludwik flow equation, respectively. Weng's dual-phase method is used to establish the relationship between the constituents...

The effect of the microstructure on the wear modes in structural ceramic materials was studied in two SIC and three A120s materials. In each class of materials, it was observed that the predominant damage mode is determined by the microstructure of the material. The materials with weak grain boundaries were found to wear primarily by grain pluckout and so showed more wear than did (the one, cr-...