The basic weldability of the alloy Al-2.2Li-2.7Cu was investigated and compared with two common aluminum alloys: 2024 and 5083. The basic weldability was characterized by the susceptibility of the alloy to hot tearing as determined by the trans-Varestraint test. The hot tearing susceptibility was characterized through plots of total crack length and maximum crack length versus augmented strain....

Microstructure and phase composition of a CrMo0.5NbTa0.5TiZr high entropy alloy were studied in the as-solidified and heat treated conditions. In the as-solidified condition, the alloy consisted of two disordered BCC phases and an ordered cubic Laves phase. The BCC1 phase solidified in the form of dendrites enriched with Mo, Ta and Nb, and its volume fraction was 42%. The BCC2 and Laves phases ...

In this article, the anti-poison performance of novel Al-6Y-2P master alloy for impurity Ca in hypereutectic Al-Si alloys was investigated in detail. According to the microstructural analysis, it can be found that the primary Si and eutectic Si particles could be relatively modified and refined. In order to investigate the influence mechanism of Ca on the limited refinement performance of Al-6Y...

Microstructure, wetting behavior and interfacial reactions between Sn–0.7Cu and Sn–0.3Ag–0.7Cu (SAC0307) solders solidified on Ni coated Al substrates were compared and investigated. Microstructure of Sn–0.7Cu alloy exhibited a eutectic matrix composed of primary β-Sn dendrites with a fine dispersion of Cu6Sn5 intermetallics whereas microstructure of SAC0307 alloy exhibited coarser Cu6Sn5 and f...

The competitive growth mechanisms of ternary eutectic and peri-eutectic transitions liquid Fe–Ni–Ti alloys were investigated by drop tube technique. As undercooling cooling rate increased, the microstructure Ni40.6Fe36.4Ti23 alloy transformed from mixture primary Ni3Ti phase into complete eutectic. predominant mode independently grown Fe2Ti intermetallic varied nonfaceted to faceted growth, whi...