background: one of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. this study evaluated the effect of electric spot welding on the load defl ection rate of stainless steel and chromium-cobalt orthodontic wires. materials and methods: in this experimental-laboratory study, load defl ection rate of 0.016 ×...

The aim of this study was to assess the effect of different plasma arc welding parameters on the flexural strength of titanium alloy beams (Ti-6Al-4V). Forty Ti-6Al-4V and 10 NiCr alloy beam specimens (40 mm long and 3.18 mm diameter) were prepared and divided into 5 groups (n=10). The titanium alloy beams for the control group were not sectioned or subjected to welding. Groups PL10, PL12, and ...

The need for more effective defence systems is of critical importance because the rising risk explosive attacks. Sandwich panels are used as plastically deforming sacrificial structures, absorbing blast wave energy. To authors’ knowledge, behaviour sandwich with connected (welded/bolted/riveted) corrugated layers has been well covered in literature. Hence, aim this numerical study was to develo...

Q690E high strength low alloy (HSLA) steel plays an important role in offshore structures. In addition, underwater local cavity welding (ULCW) technique was widely used to repair important offshore constructions. However, the high cooling rate of ULCW joints results in bad welding quality compared with underwater dry welding (UDW) joints. Q690E high strength low alloy steels were welded by mult...

This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were...

Abstract Silicic volcanic eruptions commonly begin with the explosive ejection of pyroclastic material, before transitioning to gentler effusion-dominated activity. Well-exposed dissected silicic systems are scarce and poorly studied, hindering advances in our understanding explosive–effusive transition needed improve interpretations unrest hazard forecasting. The Mule Creek vent (New Mexico, U...

This report describes a study of the fatigue behavior of fillet welded joints stressed perpendicular to the weld line. The study included an experimental phase in which the stiess-life and cracking behavior of load and nonload carrying fillet weld joints was determined. This experimental study concentrated on the fatigue behavior in the transition region between high and low cycle fatigue 3 5 (...

This paper presents an overview of our recent enhanced 3D extended finite element toolkit for Abaqus (XFA3D) for fatigue damage assessment of welded aluminum structures under block loading. To alleviate the computational burden associated with the insertion and propagation of arbitrary cracks in the presence of a welding induced residual stress field, a nodal enriched displacement field coupled...

structural health monitoring of cracked structures is one of beloved subject of researchers recently. consider of crack behavior in the water and energy pipeline is important because of environmental problems. in this paper consider of crack parameters in the underwater pipe subjected to mechanical transient load is investigated. for this purpose, three- dimensional parametric model of cracked ...