Fluidized beds are used to gasify materials such as coal or biomass in the production of producer gas. Modeling these reactors using computational fluid dynamics is advantageous when performing parametric studies for design and scale-up. While two-dimensional simulations are easier to perform than threedimensional simulations, they may not capture the proper physics. This paper compares twoand ...

Oxygen carriers play an important role in chemical looping processes to transport oxygen for fuel conversion. In this study, the defluidization phenomena of were examined under highly reducing conditions a fluidized-bed batch reactor. This is relevant chemical-looping gasification, where could be reduced significant extent compared that combustion. Only few studies have reported physical fluidi...

The aim of present study was to treat municipal wastewater in two-stage anaerobic fluidized membrane bioreactor (AFMBR) (anaerobic fluidized bed reactor (AFBR) followed by AFMBR) using granular activated carbon (GAC) as carrier medium in both stages. Approximately 95% COD removal efficiency could be obtained when the two-stage AFMBR was operated at total HRT of 5h (2h for AFBR and 3h for AFMBR)...

The mechanism of vibration energy transfer in a vibrating fluidized bed (VFB) is reported in this paper. A series of sensors was employed to simultaneously detect pressure wave propagation signals at different positions at various heights in the fluidized bed. The mechanism of vibration energy transfer in an VFB is found by wave propagation. The pressure wave was produced from a vibrating base ...

The influence of particle residence time distribution on the average conversion rate (or reactivity) of particles undergoing a non-catalytic gas-solid reaction inside a continuously operated fluidized bed reactor is evaluated. A so-called &factor is defined as the ratio of the actual reactivity in the reactor and the reactivity of a batch of particles that react under similar circumstances and ...

drying properties of high moisture potato slices with initial moisture content of about 4.06 (db) under thin layer fixed, semi fluidized and fluidized bed conditions were studied. drying air temperatures of 40, 50, 60 and 70°c were applied in experiments using a laboratory fluidized bed convective dryer. in order to predict the drying behavior of potato slices, seven thin layer drying models we...

Low-temperature gasification of black liquor is a new alternative to the conventional Tomlinson recovery boiler for recovering pulping chemicals and energy from black liquor in pulp and paper mills. This process can be carried out in a fluidized bed based on steam reforming at 600 C using indirect heat supplied via heat exchangers built into the fluid bed. As black liquor is injected into the b...

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configu...

Gas solid fluidized bed application has gained popularity as an excellent contacting device that is been widely used in thermo-chemical processes, drying food processing industries etc. due to its favorable heat transfer characteristics. Most of the outmoded fluidization activities reported confined with columnar/cylindrical shaped reactors. Conventionally, tapered/conical reactors are for ener...