The investigation of Lubricated Friction and Wear is an extended study. The aim of this study is to investigate the friction and wear characteristics of Jatropha oil based biolubricant by using Cygnus Wear Testing Machine under load of 30N, a high rotating speed of 2000 rpm and one hour operation time. In this study, SEA 40 was used as a reference base lubricant. As a biolubricant various blend...

in industrial applications, most materials are exposed to wear and friction because multiple conditions are used. however, the tribological properties of these materials can be improved with different techniques. one such technique that improves the frictional property of a surface is the use of self-lubricating coatings. in this study, multicomponent coatings of nominal composition cu-ni3al-mo...

The tribological test with Pin-On-Disc configuration measures friction and wear properties in dry or lubricated sliding surfaces of a variety of materials and coatings. Polymeric matrix composites loaded with mineral filler were used, 1%, 3%, 10%, 30%, and 50% mass percentage of filler, to reduce the material cost by using mineral tailings. Using a pin-on-disc tribometer to quantify coefficient...

A friction energy formalism is considered and adapted to formalize the fretting wear responses of adhesive wear and non-adhesive wear interfaces. It is shown that for non-adhesive wear tribocouples like hard coatings (TiN, TiC, etc.) the wear kinetics can be formalized using the accumulated friction dissipated energy. By contrast, adhesive wear contacts involving aluminium and titanium alloys d...

The dry sliding friction and wear behaviors of TC11 titanium alloy subjected to the ultrasonic impacting and rolling process (UIRP) were studied in the present work. The microstructure of the deformation layer and the morphology of the worn surfaces were observed. The results clearly show that the wear performance of TC11 alloy after UIRP is better than that of TC11 alloy before UIRP under the ...

OBJECTIVES The primary aim of this research was to investigate the wear behavior and wear mechanism of five different veneering porcelains. METHODS Five kinds of veneering porcelains were selected in this research. The surface microhardness of all the samples was measured with a microhardness tester. Wear tests were performed on a ball-on-flat PLINT fretting wear machine, with lubrication of ...