Objective. The aim of this study was to evaluate the effect of incorporation of glass fiber, zirconia, and nano-zirconia on the transverse strength of repaired denture base. Materials and Methods. Eighty specimens of heat polymerized acrylic resin were prepared and randomly divided into eight groups (n = 10): one intact group (control) and seven repaired groups. One group was repaired with auto...

INTRODUCTION Optimization of machining parameters is essential for improving expected outcome of any machining operation. CASE DESCRIPTION The aim of this work is to find out optimum values of machining parameters to achieve minimal surface roughness during milling operation of GFRP. DISCUSSION AND EVALUATION In this machining operation speed, depth of cut and feed rate are considered as pa...

This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced polyester hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Polyester resin, jute and glass fibers were laminated in three weight ratios(77/23/0, 68/25/7 and 56/21/23) respectively to form composites. The tensile...

In the present study, modelling and vibration analysis of Carbon nanotubes/ fiber/ polymer composite microplates are investigated. The governing equations of the Carbon nanotubes/ fiber/ polymer composite microplates are derived based on first order shear deformation plate theory, rather than other plate theories, due to accuracy and simplicity of polynomial functions. The modified couple stres...

This study concerns improvement of flexural stiffness/strength of concrete members reinforced with externally bonded, aluminum-glass fiber composite (AGC) beams. An experimental program, consisting of seven reinforced concrete slabs and seven reinforced concrete beams strengthened in flexure with AGC beams, was initiated under four-point bending in order to evaluate three parameters: the cross-...

in the present study, modelling and vibration analysis of carbon nanotubes/ fiber/ polymer composite microplates are investigated. the governing equations of the carbon nanotubes/ fiber/ polymer composite microplates are derived based on first order shear deformation plate theory, rather than other plate theories, due to accuracy and simplicity of polynomial functions. the modified couple stres...

The inhalation of glass dusts mixed in resin, generally known as glass fiber-reinforced plastic (GRP), represents a little-studied occupational hazard. The few studies performed have highlighted nonspecific lung disorders in animals and in humans. In the present study we evaluated the alteration of the respiratory system and the pathogenic mechanisms causing the changes in a group of working me...

In spite of their popularity in fulfilling aesthetic requirements, plastic brackets still present some disadvantages because of their low elastic modulus, decreased fracture toughness, and reduced wear resistance. Fibre-reinforced composites are well established in dentistry and consist of a polymer matrix in which reinforcing fibres are embedded. Stress is transferred from the polymer matrix t...

This paper discusses the potential use of multi-walled carbon nanotubes (MWCNTs) to improve the mechanical properties of short glass fiber composites. Two methods to incorporate MWCNTs in short glass fiber composite fabrication were examined. First, Carboxylic-functionalized MWCNTs were dispersed in a silane fiber sizing material and then were allowed to bond to the surface of glass fibers. Sec...