The corrosion behavior of the fusion zone of gas tungsten arc (GTA) welds of AA6061 alloy was studied. Role of gas tungsten arc welding techniques such as continuous current (CC) and pulsed current (PC) and reference filler (AA5356) were studied. Role of different grain refiners such as scandium, zirconium and Tibor in the reference filler was studied. Dynamic polarization testing was used to d...

The effect of anodic oxidation of a NiTi shape memory alloy in sulfuric acid electrolyte on its surface characteristics was studied. Surface roughness was measured by roughness tester. Surface morphology was studied using optical microscopy (OM) and scanning electron microscopy (SEM). Corrosion behavior was specified by recording Potentiodynamic polarization cur...

Surface characteristics such as roughness and contact angle of flat and nanostructured titanium samples and diamond-like carbon films (DLC) electrodeposited on the nanostructured samples were evaluated. Also, the mechanical properties and the corrosion resistance of the samples were evaluated in phosphate buffered saline (PBS). Biocompatibility was assessed by analyzing an in vitro cell culture...

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...

This paper reviews the influence of alloying elements Mo, Nb, Ta and Ni on glass formation and corrosion resistance of Cu-based bulk metallic glasses (BMGs). In order to obtain basic knowledge for application to the industry, corrosion resistance of the Cu-Hf-Ti-(Mo, Nb, Ta, Ni) and Cu-Zr-Ag-Al-(Nb) bulk glassy alloy systems in various solutions are reported in this work. Moreover, X-ray photoe...

BORON INDUCED SURFACE MODIFICATION OF TRANSITION METALS by Raghasudha Vangaveti Boronizing is a thermo-chemical surface treatment of metals in which boron atoms diffuse into the metal substrate and form hard metallic borides. As a result of boronizing, several properties such as hardness, wear resistance, corrosion resistance, and high temperature oxidation resistance improve which make the met...

surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...

inc alloy electrodeposits are finding increased acceptance as improved replacements for conventional electrogalvanized finishes. Zinc-nickel appears to be experiencing the most widespread use, although zinc-cobalt and zinc-iron also have well-defined market shares. The zinc-manganese system has not been widely reported; however, some investigators have examined its corrosion resistance, polariz...

The self-assembled monolayer (SAM) was prepared using octadecyl trichlorosilane (OTS) in distilled solution on the copper surface. The effect of inhibitor concentration on the rate of inhibition efficiency and corrosion rate in corrosion medium on copper by using polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) was studied. The results showed...