High temperature tensile tests have been conducted on samples of a Fe-Ni based superalloy, Incoloy A-286, and significant ductility loss has been observed at 1220 °C. Titanium-rich, thin-film-like phase has been found on the inter-granular facets of fracture surfaces. It appears that sulfur content of Ti-rich phase was higher than that of the matrix. At 1220 °C, liquation of Ti-rich phases has ...

Abstract. The mechanical and damage behavior of a X100 steel after prestrain is studied in this work. Experimental results show both a plastic and rupture anisotropy: the T direction exhibits a higher ultimate stress but the lowest ductility and toughness. Prestrain reduces ductility and crack growth resistance. A model able to represent the plastic and damage behaviour of the material before a...

Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...

Nanotwinned metals exhibit an unusual combination of ultrahigh strength, considerable ductility and enhanced rate sensitivity. We find that a Hall–Petch-type relationship closely fits the experiment data of activation volume as a function of twin spacing. The results suggest a transition of the rate-controlling mechanism from intra-twinto twin-boundary-mediated processes with decreasing twin la...

The ductility and plastic flow behavior of highly aligned nanotwinned copper produced by interrupted magnetron sputtering is investigated. Tensile tests were performed at various strain rates at both room and liquid nitrogen (77 K) temperatures. Higher ductility and strength are reported for all samples tested at 77 K. The observed inhomogeneous deformation and shear band propagation are discus...

This work focusses on analysing mechanical properties and microscopic assessment into Inconel-718 plates in welded unwelded conditions. Welding was performed by tungsten inert gas welding technique. Two tests such as tensile test hardness were both the types of to compare joint plate. Although Inconel 718 possesses good weldability, strength, ductility, reported lesser than these Unwelded The m...

The influence of alloy composition of lowmelting Sn-Bi-Cu lead-free solder alloys on mechanical properties and solder joint reliabilities were investigated. The mechanically optimum alloy composition is Sn-40Bi-0.1Cu (mass%). The addition of 40mass%Bi improves the ductility and restrains the fillet-lifting, which are problems of lead-free solders with Bi. The addition of copper improves both th...

Shear bands generally initiate strain softening and result in low ductility of metallic glasses. In this Letter, we report high-resolution electron microscope observations of shear bands in a ductile metallic glass. Strain softening caused by localized shearing was found to be effectively prevented by nanocrystallization that is in situ produced by plastic flow within the shear bands, leading t...

The microstructure and tension ductility of a series of Ti-based bulk metallic glass matrix composite (BMGMC) is investigated by changing content of the β stabilizing element vanadium while holding the volume fraction of dendritic phase constant. The ability to change only one variable in these novel composites has previously been difficult, leading to uninvestigated areas regarding how composi...

in the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized aa6061 aluminum alloy produced by equal channel angular pressing (ecap) process were investigated. the grain refinement after two passes of ecap significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. however, the improvement of low cycle fati...