Convective heat transfer of MgO-water nanofluid in a microchannel heat sink is experimentally investigated in various concentrations of 0.01, 0.05, 0.1, and 0.6 wt%. The microchannel consisted of 48 parallel rectangular cross section channels with the height of 800 µm, width of 524 µm and length of 52 mm. A well stability duration (ca. 1 month) was resulted by a 180 min ultra-sonication of the ...

The explosive viscous liquid becomes inject to warhead by discharge system. The injection device is consisted of a piston to move down and leads the viscous fluid through the cylindrical pipe towards the end of the duct. Then the viscous fluid leads into a convergent path that will be injected to the warhead or other injection equipment. In this project, the path of viscous fluid flow is divide...

A special experimental device was designed to test the anomalous thermal effect of Pd with deuterium flux (Df ) caused by deuteron diffusion passing through a thin wall of a Pd tube under a D2 pressure difference across the Pd wall. It is found that the variation of the flux was the significant precursor of the anomalous heat, because a remarkable heat flow was detected when the Df was becoming...

Advanced automotive thermal management systems integrate electro-mechanical components for improved fluid flow and thermodynamic control action. Progressively, the design of ground vehicle heating and cooling management systems require analytical and empirical models to establish a basis for real time control algorithms. One of the key elements in this computer controlled system is the smart th...

This paper presents a study of the flow and thermal structures in the molten glass bath of a typical glass melting furnace with a throat but without air bubblers or electric boosting. Different separate effects on the flow structure of the glass melt are simulated, but only the glass melt is considered. The net heat flux distribution is imposed at the combustion space/glass melt interface, and ...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

Generation of vortices enhances heat transfer by swirl, flow destabilization and development of viscous layers. They may increase heat transfer by several hundred percent. Prior to the use of vortices to influence heat transfer it must be known how different vortices are generated and controlled, and how they interact with the base flow and temperature field. To select the most appropriate vort...

The study of flow and heat transfer over rotating circular disks is of great practical importance in understanding the cooling of rotatory machinery such as turbines, electric motors and design and manufacturing of computer disk drives. This paper presents an analysis of the flow and heat transfer over a heated infinite permeable rough disk. Boundary-layer approximation reduces the elliptic Nav...