natural convective heat transfer of nano-fluid in porous media is present in many advanced engineering applications. in this work, this problem has been computationally simulated, using lbm. the configuration used includes a cold exterior region and hot interior cylinders with one-, two-, or three-cylinder arrangements. however, the effective area for heat transfer has been kept the same for al...

Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer durin...

Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105  to 5 x 106...

 Abstract: This paper presents the results of an experimental examination of the effect of non-uniform wall temperature on local heat transfer coefficient in a rotating smooth-walled square channel. Three different thermal boundary situations were investigated: (a) even and odd (four) wall uniform temperature, (b) even and odd (four) wall uniform heat flux, and (c) even (leading and trailing) w...

The mathematical model to predict the performance and the exergetic efficiency in a multi-effect desalination system with thermal vapor compression (MED-TVC system) has been presented. The energy and the concentration conservation law were developed for each effect, considering the boiling point elevation and the various thermodynamic losses by developing the mathematical models. These analyses...

In this paper, overall heat transfer coefficient and friction factor of water based γ-Al2O3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. For better dispersion of γ-Al2O3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kW and frequency of 35 kHz) were implemented. The stabi...

The heat transfer analysis of considering heat-generating components with different locations of two side-wall fans in a three-dimensional desktop computer was investigated in this paper. Herein, the well-known computational fluid dynamics (CFD) code of PHOENICS was employed to simulate the dissipative heat transfer in a ventilated enclosure. The SIMPLEST algorithm with the hybrid scheme was ut...

The heat and mass transfer analysis for MHD Casson fluid boundary layer flow over a permeable stretching sheet through a porous medium is carried out. The effect of non-uniform heat generation/absorption and chemical reaction are considered in heat and mass transport equations correspondingly. The heat transfer analysis has been carried out for two different heating processes namely; the prescr...

in this paper, turbulent mixed convective heat transfer of water and al2o3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. for the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. the coupling of pressure and veloci...

in this study. optimum allocation of heat transfer inventory for heat exchangers in a refrigeration system with specified power input or cooling capacity. and for a heat pump with specified heating capacity is investigated. the ratio of hot- to cold-end conductance unit cost ratio. g.was considered in the analysis as an additional variable of considerable importance to the designer summarized e...