Soft switching of DC-DC converter is done here. This is obtain good efficiency and to reduce the switching losses. Zero voltage switching reduces the switching losses in the circuit. This is done by using boost converter. Soft-switching characteristic of the proposed converter reduces switching loss of active power switches and raises the conversion efficiency. A voltage step-up function and a ...

Due to the decade of fossil fuels at present renewable energy plays an important role in generating power to meet the load requirements. Power produced from the renewable energy is very low. So chopper circuit is required to boost the voltage level of renewable energy sources. Chopper is a circuit in which fixed DC voltage is converted into variable voltage. There are many types of chopper circ...

This paper proposes a new passive snubber for enhancing the power conversion efficiency on a single phase ac-dc power factor correction (PFC) converter based on boost topology for battery charging systems. Soft switching can be achieved in the proposed converter with the proposed auxillary passive snubber circuit which is added to the conventional boost PFC converter. The converter switch is pr...

This paper introduces the use of the voltage multiplier technique and passive absorption circuit applied to the non-isolated dc-dc converter in order to obtain high efficiency and high voltage gain. A passive absorption circuit is inserted in the interleaved flyback converter to transfer the leakage energy to load. The operation principle of the circuit is explained. This paper also deals with ...

High power and high voltage gain DC-DC converters are key to high-voltage DC (HVDC) power transmission for offshore wind power. This paper presents an isolated ultra-high step-up DC-DC converter in matrix transformer configuration. A flyback-forward converter is adopted as the power cell and the secondary side matrix connection is introduced to increase the power level and to improve fault tole...

Abstract—In this paper, a high-conversion-ratio bidirectional dc–dc converter with coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resist...

The distributed generation (DG) systems based on the renewable energy sources have rapidly developed in recent years. These DG systems are powered by micro sources such as fuel cells, photovoltaic (PV) systems, and batteries. The micro grid concept consists of two stages, in the first stage the low level voltage from the pv cell is converted to high level voltage by using DC-DC converter. In th...

In this paper, a high voltage gain of DC-DC converter with design and simulation are proposed using coupledinductor. The proposed converter duty ratio is 0.65, so appropriate duty ratio is considering for this design of the converter. Due do more number of switches are considers for the converter circuit will make more switching power losses but in this converter using only two switches and hav...

This paper deals with a comparative analysis of various converter topologies for Power Factor Correction (PFC) in switched reluctance motor drives. Hence a power factor corrected converter required for obtaining the improved PQ at the AC mains for an inverter fed SRM drive has been analyzed. The SRM when fed by a DBR with a high value of DC-link capacitor results in highly distorted supply curr...

Received Sep 15, 2017 Revised Nov 14, 2017 Accepted Nov 23, 2017 In this paper, a straightforward strategy for tracking the maximum power (MP) accessible in the wind energy conversion system for dc microgrid is proposed. A three-phase diode bridge rectifier alongside a dc-dc converter has been utilized between the terminals of wind-driven induction generator and dc microgrid. Induction generato...