This work proposes the first hot-polymer fiber Fabry-Perot interferometer (HPFFPI) anemometer for sensing airflow. The proposed HPFFPI is based on a single-mode fiber (SMF) endface that is attached to a UV-cured polymer to form an ultracompact fiber Fabry-Perot microcavity. The proposed polymer microcavity was heated using a low-cost chip resistor with a controllable dc driving power to achieve...

Accepted: 25/10/2014 Abstract Popping is a simultaneous starch gelatinization and expansion process, during which grains are exposed to high temperatures for short time. During this process, super heated vapour produced inside the grains by instantaneous heating, cooks the grain and expands the endosperm suddenly, breaking out the outer skin. Puffing is a similar process; differ from popping as...

Currently, air-to-water heat pumps are in high demand, which, thanks to the coefficient of conversion, reduce energy consumption and negative impact on environment. The advantages using a pump safety, environmental friendliness, economy, fact that when it, dependence rising prices for natural sources is reduced. One main problems decrease productivity outside air temperature drops winter. This ...

A heat-recovery ventilator (HRV) effectively conducts ventilation by recovering waste heat from indoors to outdoors during heating periods. However, dew condensation associated with the HRV system may arise due to the difference between the indoor temperature and the very low outdoor temperature in winter, and this can decrease the heat exchange efficiency. These problems can be solved by the p...

In this study, a complete evaluation procedure of energy-saving and efficiency improvement for a large-scale hospital retrofit project has been established and successfully validated in Taiwan. The retrofit scheme, in integrating the alternative hot water system, namely, a water source heat pump (WSHP), with the existing HVAC (Heating, Ventilating, and Air-Conditioning) system, enables the capa...

BACKGROUND Even mild perioperative hypothermia is associated with several severe adverse effects. Resistive heating has possible advantages compared with other active warming systems because it can heat several fields independently. To assess this new warming system, we measured core temperature in patients during surgery who were warmed with circulating water mattresses, forced air covers or r...

Abstract The US government has set a target of reducing CO2 emissions by 20% below the 2005 targets by the year 2020. Literature review reveals that residential buildings contribute over 20% of the total emissions mainly used for space heating, cooling, water heating and lighting. In hot humid climates, the concern is mainly for cooling and hot water that account for over 50% of the total resid...

In this study, a new technical process for hardening wood fiber insulation boards is introduced. During the dry-process, the fibers are usually glued with polymeric-diphenylmethane-diisocyanate (pMDI) and hardened to wood fiber insulation boards using a steam-air mixture. However, the maximum temperature reached in the steam-air process was 100 °C, and it was impossible to use an alternative bi...

Different problems may cause distortion of the rotor, and hence vibration, which is the most severe damage of the turbine rotors. Different techniques have been developed for the straightening of bent rotors. The method for straightening can be selected according to initial information from preliminary inspections and tests such as nondestructive tests, chemical analysis, run out tests and also...