The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...

The aim of this study is to evaluate the moisture effect on the strength of concrete specimens that has completely cured. This study is also aimed to develop relations that can be used to determine the properties of concrete with different moisture contents that are normally experienced in outside conditions. Numerous compressions and split tensile tests are performed. In order to better unders...

This paper reports the results of an experimental investigation into the effects of incorporating varying amounts of expanded polystyrene beads on the engineering properties of high-strength concrete. It was observed that a density reduction of 8.3% caused compressive strength, tensile strength and modulus of elasticity to reduce by 48%, 39% and 15%, respectively. Drying shrinkage was marginall...

Due to economical and environmental issues, utilization of mineral wastes, e.g. iron ore mine tailing (IOMT), as road materials can be recommended as a sustainable alternative. In the present study, mechanical properties, as well as resistance to freezing and thawing cycles (F-T) of low plasticity clay soil stabilized with different percentages of Portland cement (0, 6, 9, 12 and 15%) and diffe...

In the present study, two types of tests (tensile strength test and polymerization inhibition test) were performed to evaluate the physical and chemical properties of four impression materials [a polysulfide (Permlastic), a polyether (Impregum), a condensation silicone (Xantopren) and a polyvinylsiloxane (Aquasil)] when polymerized in contact with of one conventional (Hemostop) and two experime...

Leaf-litter assays have advanced understanding of decomposition processes in both terrestrial and aquatic ecosystems. Some shortcomings inherent in the technique may be overcome through use of a cotton-strip assay. Key assumptions for using cotton strips as proxies for natural leaves are: 1) decomposition rates of the 2 materials are related, and 2) the materials decay in a similar way when exp...

The objective of the present paper is to examine effect Recycled Asphalt Pavement (RAP) on marshall properties and indirect tensile strength HMA through experimental investigation. A mixture with 0% RAP was used as a control mix evaluate mixes 5%, 10%, 15% RAP. One type brought from Bab Al-moadam’s road in Baghdad for this purpose. testing program included Marshall Indirect Tensile Strength tes...

An experimental study was conducted to examine the mechanical strengths of concretes with straight high-strength knurled polypropylene macrofibers. Incidences concrete were determined for three different fiber dosages and lengths. In addition, compressive, indirect-splitting-test tensile, flexural through testing. The results showed no statistically significant correlation between volume length...

Rock anisotropy plays an important role in engineering behavior of rocks. Slates are anisotropic rocks which have long been used for gable roof, floor tiles, borrow materials, and other purposes. The slates studied in this research are calcareous and have a porphyro-lepidoblastic texture. To determine the role of the anisotropy on the tensile strength and fracture pattern, two variables includi...