In this paper, we present a high-efficiency wireless power transfer system with design and measurements, for three different types of receivers. The transmitter the uses Class E/F3 amplifier second harmonic reduction to reduce distortion, resonator, proposed filter is designed be load-dependent voltage source, which means that it generates output according load impedance. resonator match impeda...

We present a high power, single-frequency fiber amplifier based on master oscillator power amplification (MOPA) chains in all-fiber configuration. A 1.5 meter long highly doped Yb fiber with absorption coefficient as high as 16 dB/m at the 975 nm wavelength is used for the main power amplifier, no special assistant stimulated Brillouin scattering (SBS) suppression approach is employed. The maxi...

ARTICLE INFO In many applications it is required to control a large output load using a relatively low control force. To satisfy such purposes, device like mechanical power amplifier can be used which generally gives very fast response. As per the requirement of the system, power can be instantaneously available from continuously rotating drums of mechanical power amplifier. This project will f...

In this paper we design the low-power CMOS limiting amplifier using negative impedance, the purpose of using negative impedance is to increase the gain of the amplifier. low-power operations are also done using all the active elements. The LA was implemented in a standard CMOS 0.18um technology. This limiting amplifier is designed for the instrumentation(bio-medical) application. Gain of the am...

The comparator is designed in pipelined ADC. FINFET is the technology which performs the dual gate MOSFET. This thesis focuses on the high-speed design of pipelined ADC. In the meanwhile, we try to minimize the power dissipation as well. In this thesis, A semidigital Gm-based amplifier is proposed for a low-power pipelined analog-to-digital converter (ADC )in HSPICE .And also we compare the pow...

Spectrally efficient linear modulation techniques are used in the third generation systems and their performance is strongly dependent on the linearity of the transmission system, Also, the efficiency of the amplifier to be used has to be maximized, which means that it must work near saturation. Newer transmission formats, with wide bandwidths, such as multi carrier wideband code division multi...

A single-stage 24 GHz triple stacked power amplifier using 0.13 μm CMOS process is demonstrated. To Compare with parallel current combining method, series voltage combining method using a stacked amplifier architecture can realize a large output voltage swing from the top transistor without exceeding the transistor breakdown voltage limitations. However, at high frequencies, parasitic capacitan...

We present a high power, single-frequency fiber amplifier based on master oscillator power amplification (MOPA) chains in all-fiber configuration. A 1.5 meter long highly doped Yb fiber with absorption coefficient as high as 16 dB/m at the 975 nm wavelength is used for the main power amplifier, no special assistant stimulated Brillouin scattering (SBS) suppression approach is employed. The maxi...

This paper presented a modified efficient inductive powering link based on ASK modulator and proposed efficient classE power amplifier. The design presents the external part which is located outside the body to transfer power and data to the implanted devices such as implanted Microsystems to stimulate and monitoring the nerves and muscles. The system operated with low band frequency 10MHZ acco...

High Efficiency Power Amplifier for Envelope Detection is presented here in this paper which uses the LDMOS power amplifier to achieve high efficiency. The main objective in this work to design a power amplifier which is more efficient when subject to various kind of situations. QAM modulation with 64 point, and Additive White Gaussian Noise Channel was used here in this work. Amplitude Modulat...