Free vibration characteristics of continuous grading fiber orientation (CGFO) beams resting on variable Winkler and two-parameter elastic foundations have been studied. The beam is under different boundary conditions and assumed to have arbitrary variations of fiber orientation in the thickness direction. The governing differential equations for beam vibration are being solved using Generalized...

We analyze the sensitivity to values of material parameters, layer thickness and impact speed of the plate deflection, the contact force between the impactor and the plate, the maximum length of a crack, and the energy dissipated during the low velocity impact at normal incidence of a clamped rectangular laminate by a rigid hemispherical-nosed cylinder. The laminate is comprised of layers of po...

Static indentation tests on carbon fibre reinforced laminates have been frequently used in literature to predict the value of penetration energy for the laminate. The mechanical set-up most commonly employed involves the use of indentors of diameter comparable with that of the impactors prescribed from standards for falling weight impact, such as ASTM D3763.The specimen is simply supported usin...

Values for printed circuit board (PCB) laminate dielectric constant (Dk) and dissipation factor (Df) used in circuit design and signal integrity (SI) modeling are typically those presented on laminate maker datasheets. In most cases, these values are derived from measurements on samples which have not been exposed to thermal stresses representative of the printed circuit board (PCB) assembly pr...

The use of bonded fiber reinforced polymer (FRP) sheets for upgrade or repair of aging and deteriorating concrete structure has emerged as a viable and cost effective method. Previous research has identified several items that influence FRP-concrete bond strength including concrete strength, type of FRP laminate, the number of layers of the FRP laminate, and the bonding agent or epoxy saturant ...

CONTEXT Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. AIMS This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. SETTINGS AND DESIGN This was an experimental, single-blinded, ...

This paper describes the modeling of magnetoelectric (ME) effects for disk-type Terfenol-D (Tb0.3Dy0.7Fe1.92)/PZT (Pb(Zr,Ti)O₃) laminate composite at low frequency by combining the advantages of the static elastic model and the equivalent circuit model, aiming at providing a guidance for the design and fabrication of the sensors based on magnetoelectric laminate composite. Considering that the ...

(2002) Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. ABSTRACT To study the toughening mechanisms of liquid rubber (LR) and core-shell rubber (CSR) in bulk epoxy and composite laminate, experimental and numerical investigations were carried out on compact tension (CT) and double-cantilever-beam (DCB) specimens und...

The paper presents the Lamb wave attenuation of Carbon Fiber Reinforced Plastic (CFRP) plates on the basis of an experimental transmitter-sensor scheme. We measured separately the S0 and A0 Lamb modes of CFRP plates with three different kind of laminate lay-ups; unidirectional [0]8s (and [90]8s), cross-ply [0, 90]4s, and quasi-isotropic [0,45,-45,90]2s. Several ultrasound transmitters were used...

The quality of dehydrated taro slices in accelerated storage (45°C and 75% RH) was determined as a function of initial water activity (aw) and package type. Color, rehydration capacity, thiamin content, and α-tocopherol content were monitored during 34 weeks of storage in polyethylene and foil laminate packaging at initial storage aw of 0.35 to 0.71. Initial aw at or below 0.54 resulted in less...