This research focuses on the stability of three metastableβ titanium alloys – Ti-10V-1Fe-3Al (T i −1013), Ti-10V-2Cr-3Al (T i −102Cr 3) and Ti-10V-2Fe-3Al-B (T i −1023B). In the first stage of the work, new β+ (α+β) heat treatment schemes were designed on the basis of Thermo-Calc® simulations and previous research work and carried out to such an extent that the β phase stability is tuned to the...

The background to this bachelor thesis is an on-going project within the VINN Excellence Center Hero-m. The task in this thesis is to perform a literature survey about the martensite transformation and investigate how the resulting fraction depends on cooling below the Ms-temperature. Instead of calculating the undercooling for each of the known fractions of martensite the driving force will be...

The classification of martensitic displacive transformations into athermal, isothermal or anisothermal is discussed. Athermal does not mean “no temperature dependence” as is often thought, but is best considered to be short for the notion of no thermal activation. Processes with no thermal activation do not depend on time, as there is no need to wait for sufficient statistical fluctuations in s...

Thermodynamically consistent, three-dimensional (3D) phase field approach (PFA) for coupled multivariant martensitic transformations (PTs), including cyclic PTs, variant– variant transformations (i.e., twinning), and dislocation evolution is developed at large strains. One of our key points is in the justification of the multiplicative decomposition of the deformation gradient into elastic, tra...

the microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. in this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. i...

Nano-structured NiTi instantaneously transforms from fcc austenite via an intermediate phase (the R-phase) into monoclinic B19’ martensite. At a grain size less than a critical limit of about 50nm no transformation can be observed even upon cooling down to cryogenic temperatures. In slightly larger grains the martensite appears as a laminate of alternating twinrelated Bain correspondence varian...

This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...

A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...

The objective of this work was to study materials subjected to external loading where alternative deformation mechanisms are available to generate strains. In the case of shapememory and superelastic NiTi, these mechanisms are twinning and stress-induced phase transformation, respectively. Superelastic NiTi (51.0 at.% Ni) reinforced with 0, 10 and 20 vol.% TiC particles was fabricated by Hot Is...