In this study, the possibility of producing coal with less than 11% ash from tailings of flotation process was investigated. The effect of six flotation parameters: collector type, collector consumption, frother type, frother consumption, pulp density and mixing rate were studied on a sample from a tailing dam. A software based experimental design approach (DX7) was applied to determine and mod...

In this paper, the influence of Ca2+ on the flotation of a skarn type molybdenum ore and pure molybdenite mineral at pH 8 was studied using diesel as the collector. It was found that Ca2+ had little effect on molybdenum flotation at low concentrations. By further increasing Ca2+ concentration, the floatability of molybdenite—especially from the fine size fractions—was depressed even without the...

In this paper the possibility of using the pyrolysis oil derived from waste tyres as a collector in flotation of coal was evaluated. The pyrolysis oil was obtained at the initial and final pyrolysis temperatures of 400 and 700 C, respectively, and the heat holding time of 30 min. Flotation results indicated that the pyrolysis oil emulsion showed stronger collecting ability than diesel and the c...

Introduction: The presence of antibiotics due to toxicity and sustainability as well as organic compounds as a combination of hard biodegradable wastewater is an undesirable issue in many industries. The aim of this study was to evaluate the efficiency of dissolved air flotation process for aniline and penicillin G removal from aqueous solutions. Methods: This was an empirical-lab study to w...

This paper presents a new approach for flotation circuit design. Initially, it was proven numerically and analytically that in order to achieve the highest recovery in different circuit configurations, the best equipment must be placed at the beginning stage of the flotation circuits. The size of the entering particles and the types of streams including pulp and froth were considered as the bas...

A lead-zinc carbonate ore sample containing 2.5% Pb and 9.39% Zn was used in this research work. The sample was prepared from the Darreh-Zanjir mine located in the Yazd province (Iran). Influences of the influential factors on flotation of smithsonite and cerussite were investigated. Among the different parameters involved, dosages of the dispersant, depressants, sulfidizing agent, and collecto...

Surfactants and their mixtures can drastically change the interfacial properties and hence are used in many industrial processes such as dispersion/flocculation, flotation, emulsification, corrosion inhibition, cosmetics, drug delivery, chemical mechanical polishing, enhanced oil recovery, and nanolithography. A review of studies on adsorption of single surfactant as well as mixtures of various...

A site-specific study is carried out to assess the suitability of froth flotation for desulphurization of reactive mine tailings at the Musselwhite Mine, Northern Ontario, Canada, to prevent acid mine drainage (AMD). The results from pilot scale flotation tests on an Outokumpu flotation unit are presented, which confirm that froth flotation is effective to reduce sulphide contents of tailings. ...

The recently shown transmissibility of variant Creutzfeldt-Jakob disease (vCJD) by blood transfusion emphasises the need for better understanding of the cellular prion protein (PrPc) in blood. A substantial amount of cell-associated PrPc in blood resides in platelets. Platelet activation leads to up-regulation of PrPc on the platelet surface and its release on exosomes and microparticles. The s...

Mathematical models have been developed to predict the removal of alumina inclusions from molten steel in a continuous casting tundish, including the effects of turbulent collisions, reoxidation, flotation, and removal on the inclusion size distribution. The trajectories of inclusion particles are tracked through the three-dimensional (3-D) flow distribution, which was calculated with the K-ε t...