introduction: the purpose of the presented study was to evaluate the effect of zirconia thickness on the tensile stress of zirconia based all-ceramic restorations. methods: twenty zirconia disks with 10mm diameter were prepared in two groups using cad/cam system. the thickness of zirconia was 0.5mm in first group and 0.3mm in second group. after sintering, 0.4mm glass ceramic porcelain was appl...

The fracture toughness of a polymer-metal laminate composite is obtained by mechanical testing of a specimen containing a pre-crack. The laminate is a material used for packaging. It consists of a thin aluminium foil and a polymer coating. A centre cracked panel test geometry is used. Each of the layers forming the laminate is also tested separately. The result is compared with the measured fra...

fiber metal laminates (fmls) are new composite materials consisting of thin metal layers and high strength composite layers. arall (aramid aluminum laminate) is a family of the fml that consists of thin aluminum sheets along with kevlar/epoxy composite layers. this material has many advantages such as light weight, excellent corrosion, fatigue and impact resistance. since, arall is a new materi...

Abstract Hybrid laminates with continuous fiber reinforcement, such as glass reinforced aluminium laminate (GLARE), aramid aluminum (ARALL), or carbon (CARALL), have been developed to increase the lightweight potential and fatigue resistance applied for aircraft structures. However, use of thermosetting matrices imposes material limitations regarding recycling, malleability, manufacturing-cycle...

This paper studies interfacial mechanical behavior of laminate beams, consisting of two piezoelectric facial sheets and an elastic core. The study is based on coupled multi-filed finite element formulation. The emphasis is placed on mechanical and electric behavior of interfaces between piezoelectric material and elastic material, including effect of geometrical parameters, stress distribution ...

Two themes form the basis of this study on fibre reinforced laminated composites: namely 'thermal residual stress' and 'transverse cracking'. Thermal residual stresses are inherent to any composite structure and are internal stress within the structure that form during manufacture. Their formation arises from the difference in coefficient of thermal expansion of the fibre and the matrix. These ...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

When a piezoelectric film is glued on the surface of a structure member subjected to mechanical load, a distribution of electric potential is induced. In the existence of defects in the member, a characteristic variation of electric potential is observed. Based on this phenomenon, the passive electric potential CT (computed tomography) method is developed for detecting and identifying defects i...