We have studied the resistance of single-wall carbon nanotubes measured in a four-point configuration with noninvasive voltage electrodes. The voltage drop is detected using multiwalled carbon nanotubes while the current is injected through nanofabricated Au electrodes. The resistance at room temperature is shown to be linear with the length as expected for a classical resistor. This changes at...

Organic-inorganic hybrid photovoltaics are beginning to show significant promise as a low cost highly efficient route towards renewable energy generation. Of the hybrid architectures available, carbon nanotube incorporated organic photovoltaics is considered to be among the most promising. Herein, the optical and electronic effects of localizing multiwalled carbon nanotubes in the donor polymer...

Multiwall carbon nanotubes (MWCNTs) were oxidized with different agents and a characterization study was carried out. Then, hybrid-magnetic nanoparticles (HMNPs) were synthesized as iron oxide supported on the selected multiwalled carbon nanotubes (MWCNTs-Fe₃O₄) obtained from MWCNTs oxidized with HNO3. The HMNPs characterization revealed the presence of iron oxide as magnetite onto the MWCNTs s...

In this paper, multi-walled carbon nanotubes are synthesized by arcdischarge and chemical vapor decomposition methods. Multi-walled carbon nanotubes are synthesized on thin film of nickel sputtered on silicon substrate by thermal chemical vapor deposition of acetylene at a temperature of 750°C. The flow of current in arc-discharge method varies in the range 50–200 A. Further arcsynthesized carb...

The electrochemistry of banana tissues on a carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) is presented. Cyclic voltammetry is applied to investigate the direct electrochemistry of banana tissues i.e. a source of polyphenol oxidase (PPO). A redox couple with an anodic and counterpart cathodic peak is obtained. The influence of various parameters such as pH,...

in this paper, synthesized (raw) multi-walled carbon nanotube (rmwcnts) surfaces were modified with chitosan and β-cyclodextrin using chen’s soft cutting technique. raw and surface modified multi-walled carbon nanotubes were observed by transmission electron microscope (tem). the results showed that chitosan and β-cyclodextrin could attach to the outer surface of nanotubes, wrapping the nanotub...

BACKGROUND Carbon nanotubes represent a class of nanomaterials having broad application potentials and documented cellular uptake and ecotoxicological effects that raise the possibility that they may bioaccumulate in living organisms. OBJECTIVES Radioactively labeled nanotubes were synthesized using a novel methane chemical vapor deposition procedure. Single-walled carbon nanotubes (SWNTs), m...

Lithiation of individual multiwalled carbon nanotubes (MWCNTs) was conducted in situ inside a transmission electron microscope. Upon lithiation, the intertube spacing increased from 3.4 to 3.6 Å, corresponding to about 5.9% radial and circumferential expansions and ∼50 GPa tensile hoop stress on the outermost tube wall. The straight tube walls became distorted after lithiation. In situ compress...

Thermal conductivity of individual multiwalled carbon nanotubes (MWCNT) is measured using a pulsed photothermal reflectance technique. Intrinsic thermal conductivity of individual MWCNT with a diameter 150 nm and length 2 mm at room temperature is extracted to be 2586 W/mK. Individual MWCNT is surrounded by SiO2, so parallel resistor model is applied in which SiO2 supportive is treated as a con...