Anodic aluminum oxide (AAO) film with a thickness ranging from 20 to 100 μm was prepared using large-sized Al plate (4 cm × 10 cm) investigate the anodization parameter effect on and volume expansion factor. A corrosion treatment (voltage = 0 V) performed dissolution caused by acid. The actual anode surface temperature also measured confirm field-assisted nature of AAO dissolution. increases ex...

This paper proposes a novel approach to fabricate hyper-branched anodic aluminium oxide (AAO) nanostructures with different branches on the vertically-aligned trunk and at the trunk terminal. Silver nanowires with different dimensional and multifunctional complexity have been prepared from this hyper-branched AAO template by varying the electrodeposition time. These kinds of novel nanostructure...

A one-dimensional array of nanopores horizontally aligned on a silicon substrate was successfully fabricated by anodic aluminum oxidation (AAO) using a modified two-step procedure. SEM pictures show clear nanostructures of well-aligned one-dimensional nanopore arrays without cracks at the interfaces of the sandwiched structures. The processes are compatible with the planar silicon integrated ci...

A vertically aligned Pd nanowire array was successfully fabricated on an Au/Ti substrate using an anodic aluminum oxide (AAO) template by a direct voltage electrodeposition method at room temperature using diluted neutral electrolyte. The fabrication of Pd nanowires was controlled by analyzing the current-time transient during electrodeposition using potentiostat. The AAO template and the Pd na...

Citation: Castro-Muñiz A, Hoshikawa Y, Komiyama H, Nakayama W, Itoh T and Kyotani T (2016) Improving the Direct Electron Transfer in Monolithic Bioelectrodes Prepared by Immobilization of FDH Enzyme on Carbon-Coated Anodic Aluminum Oxide Films. Front. Mater. 3:7. doi: 10.3389/fmats.2016.00007 improving the Direct electron Transfer in Monolithic Bioelectrodes Prepared by immobilization of FDh en...

AgI nanowires/anodic aluminum oxide (AgI NWs/AAO) composites have been fabricated by a simple approach, which involves the thermal melting of AgI powders on the surface of the AAO membrane, followed by the infiltration of the molten AgI inside the nanochannels. As-prepared AgI nanowires have corrugated outer surfaces and are polycrystalline according to scanning electron microscopy (SEM) and tr...

Self-assembled supramolecular organization of nano-structured biomimetic light-harvesting modules inside solid-state nano-templates can be exploited to develop excellent light-harvesting materials for artificial photosynthetic devices. We present here a hybrid light-harvesting system mimicking the chlorosomal structures of the natural photosynthetic system using synthetic zinc chlorin units (Zn...

Amorphous Si nanowires have been directly synthesized by a thermal processing of Si substrates. This method involves the deposition of an anodic aluminum oxide mask on a crystalline Si (100) substrate. Fe, Au, and Pt thin films with thicknesses of ca. 30 nm deposited on the anodic aluminum oxide-Si substrates have been used as catalysts. During the thermal treatment of the samples, thin films o...

anodic aluminum oxide (aao) fabricated by two step anodization technique, is used as a template to synthesize feco nanowire arrays by ac electrodeposition technique. response surface methodology (rsm) is applied to design the experiments, fit an empirical model and optimize the conditions to achieve the best magnetic properties. the magnetic properties, pore dimensions, composition and structur...