A novel and simple approach to optical wavelength measurement is presented in this paper. The working principle is demonstrated using a tunable waveguide micro ring resonator and single photodiode. The initial calibration is done with a set of known wavelengths and resonator tunings. The combined spectral sensitivity function of the resonator and photodiode at each tuning voltage was modeled by...

We present a design of "ideal" optical delay lines (i.e., constant amplitude and constant group delay over the desired bandwidth). They are based on reflection from coupled-resonator optical waveguides (CROWs). The inter-resonator coupling coefficients are tailored and decrease monotonically with the distance from the input to realize all-pass Bessel filters. The tailored coupling coefficients ...

Two different approaches are commonly used for Fabry-Perot Semiconductor Optical Amplifiers (FP SOAs) performance analysis: the Fabry-Perot resonator approach and rate equation approach. Compared with the Fabry-Perot resonator approach, the rate equation approach is more powerful because noise and mode-related performance analysis can be included. However, it has been shown that the results bas...

We demonstrate optical 2R regeneration in an integrated silicon device consisting of an 8-mm-long nanowaveguide followed by a ring-resonator bandpass filter. The regeneration process is based on nonlinear spectral broadening in the waveguide and subsequent spectral filtering through the ring resonator. We measure the nonlinear power transfer function for the device and find an operating peak po...

Optical Q factor measurements are performed on a whispering gallery mode (WGM) disk resonator using a microwave frequency domain approach instead of using an optical domain approach. An absence of hysteretic behavior and a better linearity are obtained when performing linewidth measurements by using a microwave modulation for scanning the resonances instead of the piezoelectric-based frequency ...

This paper presents a novel approach to measuring the Q factors of a quasi-optical resonator used in a free electron maser (FEM) operating at 100 GHz. Estimation of the Q factors is based on measuring the reflection coefficient in the vicinity of resonance frequencies. The unknown parameters (attenuation constant and coupling inductance) are determined from the numerical solution of a nonlinear...

We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings that enclose a subwavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F=86 while the on-resonance transmission is T=11%. The characteristics of our resonator fulfill the req...

We report the initial evaluation of a mid-infrared QCL-coupled silicon-on-sapphire ring resonator gas sensor. The device probes the N(2)O 2241.79 cm(-1) optical transition (R23 line) in the ν(3) vibrational band. N(2)O concentration is deduced using a non-linear least squares fit, based on coupled-mode theory, of the change in ring resonator Q due to gas absorption losses in the evanescent port...

We have constructed and characterized several optical microring resonators with scale sizes of the order of 10 microm. These devices are intended to serve as building blocks for engineerable linear and nonlinear photonic media. Light is guided vertically by an epitaxially grown structure and transversely by deeply etched air-clad sidewalls. We report on the spectral phase transfer characteristi...

The specific features including high factor and long vibration lifetime of nanomechanical resonator (NR) in nano-optomechanical systems have stimulated research to realize some optical devices. In this work, we demonstrate theoretically that it is possible to achieve quantum memory for light on demand via a quantum dot system coupled to a nanomechanical resonator. This quantum memory for light ...