This communication demonstrates a method of transferring unreacted low molecular weight (LMW) siloxane oligomers from freshly prepared "dry" PDMS stamps for patterning organic semiconductors and conducting polymers into functional devices via selective wetting. The semiconductors were patterned onto the modified surfaces via dip-coating with well-resolved feature sizes as small as 1 mum. Functi...

Ž . Ž . An ion-selective field effect transistor ISFET was applied as a potentiometric detector in liquid chromatography LC for the Ž determination of organic acids. The ISFET was prepared by coating the gate insulator of the encapsulated transistor with a poly vinyl . Ž . chloride PVC matrix membrane containing methyltridodecylammoniumchloride, which enables the detection of organic anions. Th...

In this study, an organic-inorganic semiconductor gas sensor was fabricated to detect ammonia gas. An inorganic semiconductor was a zinc oxide (ZnO) nanowire array produced by atomic layer deposition (ALD) while an organic material was a p-type semiconductor, poly(3-hexylthiophene) (P3HT). P3HT was suitable for the gas sensing application due to its high hole mobility, good stability, and good ...

Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic sing...

An ITO substrate with periodic surface nanostructures was used to induce strong diffusion and diffraction of incident light. The nanostructures were fabricated using nanoimprint lithography on photoresist followed by coating of the ITO layer and organic materials with uniform morphology. The nanostructures embedded into the ITO layer were found to increase absorption in poly(3-hexylthiophene):[...

Organic photovoltaics has come into the international research focus during the past three years. Up to now main efforts have focused on the improvement of the solar conversion efficiency, and in recent efforts 5% white light efficiencies on the device level have been realized. Despite this in comparison to inorganic technologies low efficiency, organic photovoltaics is evaluated as one of the ...

We present a review of the emerging class of hybrid solar cells based on organic-semiconductor (Group IV, III-V), nanocomposites, which states separately from dye synthesized, polymer-metal oxides and organic-inorganic (Group II-VI) nanocomposite photovoltaics. The structure of such hybrid cell comprises of an organic active material (p-type) deposited by coating, printing or spraying technique...

Isocyanate-free cathodic ED coatings. Most of the resins used in the cathodic electrodeposition (CED) coatings are made from modified epoxy resin and blocked polyisocyanate in which the crosslinking is achieved by polyurethane and polyurea formation. A resin system has been developed that is isocyanate free and avoids not only the toxicity aspect, but also, to a great extent, the weight loss of...

The application of low pressure membranes (microfiltration/ultrafiltration) has undergone accelerated development for drinking water production. However, the major obstacle encountered in its popularization is membrane fouling caused by natural organic matter (NOM). This paper firstly summarizes the two factors causing the organic membrane fouling, including molecular weight (MW) and hydrophili...