This paper describes the use of artificial neural networks (ANN) for predicting non-linear layer moduli of flexible airfield pavements subjected to new generation aircraft (NGA) loading, based on the deflection profiles obtained from Heavy Weight Deflectometer (HWD) test data. The HWD test is one of the most widely used tests for routinely assessing the structural integrity of airport pavements...

Reinforcement using an interlayer system has been demonstrated for more than four decades as a multi-purpose solution to improve performance, to extend service life and thus to reduce maintenance costs of road pavements. Among a large number of existing interlayer systems, glass fiber grids have shown effective use in pavement reinforcement with a hot mix asphalt overlay. Recently they have rec...

The state of Victoria in Australia has many major roads assets. These roads, stretching about 196,000 in km, have to be maintained and managed by VicRoads, the road authority of Victoria[1], and the local councils. Pavement Management Services (PMS) [2] company was employed by VicRoads in 2002/3 to do the analysis and detection of the pavement cracking in Victoria. PMS uses up to five industria...

This research assesses the next generation of permeable pavement systems (PPS) incorporating ground source heat pumps (geothermal paving systems). Twelve experimental pilot-scaled pavement systems were assessed for its stormwater treatability in Edinburgh, UK. The relatively high variability of temperatures during the heating and cooling cycle of a ground source heat pump system embedded into t...

A fundamental component of computer-based video image analysis for pavement distress evaluation is identification of the type of distress from geometric and textural properties of an area of interest identified during image analysis. This study describes the algorithms used to identi_fy and classify the most common pavement distress types once a possible distress region is identified on an imag...

Several pavement failures have been observed to be initiated at or near the surface of the hot-mix asphalt layers and some of them propagate downward through the surface layer (top-down cracking). These modes of failure are affected by heavy vehicular loading configuration, pavement structure and their interaction at the tire-pavement contact. This paper documents an experimental investigation ...

The load-bearing capacity of pavement structures is a fundamental structural performance metric of transportation infrastructure networks in the context of safe and efficient movement of people and goods from one place to another. Non-destructive test (NDT) methods are typically employed to routinely evaluate the structural condition of pavement structures, their lifespan and the appropriate ma...

Pavement-watering as a technique of cooling dense urban areas and reducing the urban heat island effect has been studied since the 1990’s. The method is currently considered as a potential tool for and climate change adaptation against increasing heat wave intensity and frequency. However, although water consumption necessary to implement this technique is an important aspect for decision maker...

Pavement condition assessment is essential when developing road network maintenance programs. In practice, pavement sensing is to a large extent automated when regarding highway networks. Municipal roads, however, are predominantly surveyed manually due to the limited amount of expensive inspection vehicles. As part of a research project that proposes an omnipresent passenger vehicle network fo...

The effects of a symbolic "yield here to pedestrians" sign and advance yield pavement markings on pedestrian/motor vehicle conflicts, motorists' yielding behavior, and the distance motorists' yield in advance of crosswalks were evaluated at multilane crosswalks at uncontrolled T intersections. In Experiment 1, the sign, when used alone, reduced pedestrian/motor vehicle conflicts and increased m...