The grafting effect of maleic anhydride (MA) as an interfacial bonding agent and its influence on the tensile strength properties of thermomechanical pulp handsheet-isotactic polypropylene (iPP) film laminates was studied. For the MA treated with benzoyl peroxide (BPO) as an initiator, tensile strength properties increased 76% with PP film over untreated laminates. The optimal strength properti...

Glass fibers (GF) are the reinforcement agent most used in polypropylene (PP) based composites, as they have good balance between properties and costs. However, their final properties are mainly determined by the strength and stability of the polymer-fiber interphase. Fibers do not act as an effective reinforcing material when the adhesion is weak. Also, the adhesion between phases can be easil...

The use of vegetal fibres in thermoplastic matrix is increasing mainly because of their opportunity to recycle the structures. An another advantage is to provide materials for developing countries were these fibers are abundant. Nowadays, a lot of studies are more focused on the fibers to understand their microstructure and to establish their mechanical properties [1,2]. One of the main results...

High dry friction requires intimate contact between two surfaces and is generally obtained using soft materials with an elastic modulus less than 10 MPa. We demonstrate that high-friction properties similar to rubberlike materials can also be obtained using microfiber arrays constructed from a stiff thermoplastic (polypropylene, 1 GPa). The fiber arrays have a smaller true area of contact than ...

Soyprotein–jute fiber composites developed using water without any chemicals as the plasticizer show much better flexural and tensile properties than polypropylene–jute composites. Co-products of soybean processing such as soy oil, soyprotein concentrate and soy protein isolates are inexpensive, abundantly available and are renewable resources that have been extensively studied as potential mat...

The development of environmental friendly engineering material has received top priority recently. Glass fiber (GF) reinforced polypropylene (PP) composites is one of the most widely used materials in the automotive industry due to its favourable properties. However, the presence of GF has become a major issue in the recycling of GF/PP composites. Considerable efforts have been devoted to find ...

Olefin fibers, also called polyolefin fibers, are defined as manufactured fibers in which the fiber-forming substance is a synthetic polymer of at least 85 wt% ethylene, propylene, or other olefin units (1). Several olefin polymers are capable of forming fibers, but only polypropylene [9003-07-0] (PP) and, to a much lesser extent, polyethylene [9002-88-4] (PE) are of practical importance. Olefi...

In this work, a mathematical model is established to describe the removal of CO2 from gaseous mixtures including CH4 and CO2 in a polypropylene hollow fiber membrane contactor in the presence of conventional absorbents such as monoethanolamine (MEA), methyldiethanolamine (MDEA), and a blend of them. Modeling was performed in axial and radial directions under the fully-wet condition for counterc...