A microporous polypropylene (PP) hollow fiber membrane contactor was used as a reactor to biodegrade phenol in high-salinity solutions by Pseudomonas putida CCRC14365 at 30C. Suspended cells grew only at a NaCl concentration below 2.5 wt%. On the other hand, cells within hollow fibers completely degraded 0.5 g/L of phenol in solution containing NaCl up to 8.6 wt%, likely due to the fact that th...

Online commingled yarns were spun with three different polymeric matrices, namely polypropylene (PP), polyamide (PA) and polylactic acid (PLA) and glass fibers. Tailored sizings were applied for the three matrices and the resulting mechanical performance of unidirectional composites was evaluated and compared. Significant improvements in the fiber/matrix bonding were achieved by employed sizing...

The adhesive pads of geckos provide control of normal adhesive force by controlling the applied shear force. This frictional adhesion effect is one of the key principles used for rapid detachment in animals running up vertical surfaces. We developed polypropylene microfiber arrays composed of vertical, 0.3 μm radius fibers with elastic modulus of 1 GPa which show this effect for the first time ...

The construction sector is one of the main consumers raw materials and generates a high volume waste within European Union. search for new that are more sustainable respectful environment has become challenge countries with degree industrialization. In this work, study most relevant properties masonry mortars made recycled aggregates reinforced synthetic fibers was carried out. Three types were...

A novel approach based on the use of nanometallic-decorated hollow fibers to assist electromembrane extraction is proposed. Microporous polypropylene hollow fibers, on which nanometallic silver was deposited, have been used for the first time as liquid membrane support in electromembrane extraction (EME). Different methods for the generation/deposition of silver nanoparticles (AgNPs) were studi...

This work presents an improved single fiber pull-out test for fiber/matrix interface characterization. This test has been used to study the Inter-Facial Shear Strength ‘IFSS’ of hemp fibers reinforced polypropylene (PP). For this aim, the fiber diameter has been carefully measured using a tomography inspired method. The fiber section contour can then be approximated by a circle or a polygon. Th...

This part of the study aims to investigate the role of fiber finish during processing on the needlepunching machine. Certain key response parameters like dynamic needling forces and needlepunched fabric properties are analyzed for any possible effect of finish level and its uniformity on these responses. The experiments were performed using polyester and polypropylene, two of the most commonly ...

A newly designed capillary deoxygenator has been constructed by using microporous polypropylene hollow fibers sealed into an airtight plexiglass housing. Oxygenated red cell suspensions and hemoglobin solutions flowing through the hollow fibers were subjected to deoxygenation with a gas mixture composed of 95 percent N2 and 5 percent CO2 passed through the housing. At a given flow rate of the o...

Cement is as an adhesive that binds pieces of solids together. In this research, the main materials used in construction such cement, concrete and steel are described. After described to what extent nanomaterials silicon, titanium nanoxide, polypropylene nanofibers, microsilica nano calcium carbonate do compressive strength cement increase prevent corrosion erosion. Polypropylene nano-fibers ad...