The ultimate goal for an esthetic rehabilitation is the restoration of health, beauty, and function to the patient. This article illustrates a predictable system to guide the clinician with tooth preparations for porcelain veneer restorations based upon the additive diagnostic wax-up. This system promotes a preparation technique using a series of guides that direct the clinician to reduce only ...

PURPOSE To compare the effects of different porcelain surface treatment methods on the shear bond strength (SBS) and fracture mode of orthodontic brackets. MATERIALS AND METHODS Seventy feldspathic porcelain disk samples mounted in acrylic resin blocks were divided into seven groups (n=10) according to type of surface treatment: I, Diamond bur; II, Orthosphoric acid (OPA); III, hydrofluoric a...

STATEMENT OF PROBLEM Recent clinical results for Zirconia all-ceramic restorations have revealed that the fracture rate 6-15% of the Zirconia framework is so low and the core of Zirconia has high stability. However, chipping-off fractures of porcelain are the most common reason for failures of Zirconia in the fixed partial dentures. OBJECTIVES The purpose of this study was to compare the shea...

STATEMENT OF THE PROBLEM The success of metal- ceramic- restorations (MCR) depends on the presence of strong bond between porcelain and metal substructure. PURPOSE The purpose of this study was to evaluate the effect of hot pressing technique on the bond strength of a metal-porcelain composite in comparison to layering technique. MATERIALS AND METHOD Thirty Nickel-Chromium specimens were pr...

The aim of this study was to assess whether surface treatment improves zirconia-porcelain adhesion. The 3Y-TZP blocks were cut into squares, then polished and sintered. The zirconia surface treatments were performed as follows: no treatment (C); tribochemical silica coating (TBS); glaze application + hydrofluoric acid etching (GA); glaze application + hydrofluoric acid etching + silanization (G...

OBJECTIVES All ceramic restorations without metal have great advantages in their biocompatibility and aesthetic aspects. With the introduction of new core materials, the cores are sufficiently strong to produce long lasting all-ceramic restorations; however, the stresses in the veneering porcelain could still determine the longevity. The objective of this study was to evaluate, by finite elemen...

In this paper, we describe a solid freeform fabrication procedure for human dental restoration via porcelain slurry micro-extrusion. Based on submicron-sized dental porcelain powder obtained via ball milling process, a porcelain slurry formulation has been developed. The formulation developed allows the porcelain slurry to show a pseudoplastic behavior and moderate viscosity, which permits the ...

To elucidate the cause of brittleness of porcelain fused to pure titanium (PFPT) which leads to chipping and cracking similar to that of conventional porcelain in clinical use, fracture toughness KIc, hardness (Hv and Hk) and fracture energy gamma reflecting the bonding energy of atoms were evaluated. In KIc there were no differences between PFPT and conventional porcelain, nor for Hv and Hk, b...

The repair of a fractured porcelain surface with a resin composite was investigated. The effects of applying an opaque resin to porcelain surfaces, which were silanated by a ceramic primer from a repair kit or by an experimental silane coupling agent, were studied. The porcelain surfaces were silanated for 10 sec and 60 min. Three types of adherents were evaluated: opaque resin with light irrad...

Dental porcelain composites reinforced and toughened by 20 wt.% tetragonal zirconia (3Y-TZP) were processed by hot pressing at 1000°C. Two types of particles were tested: yttriastabilized zirconia (ZrO2–3%Y2O3) agglomerates and pre-sintered yttria-stabilized zirconia (ZrO2–3%Y2O3) particles. The composites as well as the reinforcing particles were analyzed by the means of optical and Scanning E...